OMS (D) WING TRIESTE 60LB. (27.2 kg) Lift

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. The OMS Trieste 60 lbs. (27.2 kg) lift Dual Bladder Wing is equipped with elastomeric bands for low drag. OMS BC's uses rugged 1000 denier nylon backed with urethane for superior abrasion resistance in all overhead environments on the outer bag. The inner bladder is constructed of tough polyurethane material with ultrasonically welded (RF) seams and fittings for added strength. The inflation and dump valves are interchangeable for ease of configuration from top to bottom. Like all OMS BC's 60 lbs. (27.2 kg) dual bladder integrates with many OMS harnesses where integral pull dump tunnels can be used to route the BC dump valve cords for ease of access.

This Wing is engineered with a dual bladder, incorporates a "donut design", resulting in superior buoyancy and trim control. The top of the BC (neck area) has a narrower air pathway design and the bottom air tunnel adds 10 lbs. (4.54 kg) of lift (butt area) creating an optimum "heads up" trim position. The dual bladder wing by design, maintains a low profile and drag ratio due to the new and unique retraction band system. Diver's side located inflator and dump assemblies eliminate "hang-ups", impact damage and drag in overhead environments. The dual wings internal bladders are constructed of tough polyurethane material with ultrasonically welded seams and fittings for added strength. Both OMS inflators come with low pressure 3/8" threaded quick-disconnect (QD) hoses. The wing band mounting is rubber reinforced with dual cylinder band slots and comes equipped with six corrosion resistant stainless steel grommets. The OMS Trieste Dual Bladder Wing is available in multiple color choices and comes with an owner's manual.