ScubaPro Mask Mount for GoPro Cameras

Mario C  We tested at the store and yes it does work. it sits a bit lose., having the zip tie tight is paramount to ensure it wont be wobbly.

MICHAEL M  It will only work on twin lens masks. It mounts to the top of the frame. It is a solid mount and works very well with my go pro.

Peter A  Hi Danielle. Sorry if this is a duplicate. I replied to this but it was not clear that my reply was sent. Dismount requires a dual lens mask like the scubapro Spectra. That's because the mount uses a zip tie that goes between the mask frame and the Silicon skirt just above the nose between the two lenses. I hope this helps

Peter A  Hi, Daniel. The Scubapro mask mount for Gopro requires a dual-lens mask with a gap between the frame and the silicone skirt just above the nose (you should be able to put your finger in the gap). That's where you'll secure it with a zip tie. I use a Scubapro Spectra mask, but any mask that meets those requirements should accept the mount.

Richard F  Attaches with a zip tie between the lenses. It looks like it would work but I never used it. Just held camera in my hand.

Peter C  it uses a small zip tie to attach around what would be the are of the bridge of the nose, it needs to be two separate lenses so it has the piece in the middle

KEVIN F  It mounts with a zip tie (cable tie) on most masks with 2-lens design. However, there are some 2-lens masks that it may not work on.

Christopher A  Mounts using supplied zip tie around the bridge of the nose part of the mask. This will work only on masks that have 2 lenses.

David F  It mounts with a plastic zip tie. It will only mount to a mask that has space between the rubber seal and plastic frame. Worked ok for me. But personally I found I like holding my goPro in my hand on a mount.

Peter C  As long as there are 2 separate lenses then yes it should fit

TROY B  If your mask has the frame piece between the lens with separate lens' then yes. It attaches with a zip tie and works awesome.

Christopher A  Yes it will fit but you may have to modify the GoPro mount to fit securely because it's meant as a universal solution to mounting a GoPro to a scuba mask.

Jadwiga G  I'm not sure. For connection it with mask you have a plastic string

DAVID C  Fits on mine.

Jadwiga G  I'm not sure. For connection it with mask you have a plastic string (UV Cable Tie like Home Depot sells). It is not stable. I think I can be glued permanently using good water proof glue.

Roland L  This GoPro mask mount will fit any double lens mask, and it is unbelievably affective I I highly recommend this for your GoPro.

ZACH H  T will fit on almost all masks that have 2 lenses. It attaches by a zip tie around the nose bridge between the frame and the mask skirt.

MATTHEW S  Any split lens mask, I have four different masks I use mine on just depends on what I'm doing and conditions. It's great, a lot better than just having one specialty mask just for the GoPro which limits you so much!

Peter A  It fits perfectly on my scubapro Spectra mask. There is a plastic tie thing that goes between the frame and the nose pocket to secure it so it should work fine with other scubapro masks that have separate lenses. Possibly other manufacturers too. Certainly the Spectra

Tom S  This mount works with twin lens masks that have a frame that is separate (not bonded to) the silicon skirt of the mask, at least around the nose bridge area. The reason for this is that the mount is attached to the mask by means of a zip tie that is threaded through a channel in the back of the mount (you can't see it here) and then under the existing bridge of your mask, between the hard frame and the silicon skirt. So the mount is resting on top of the bridge of your mask, and held in place with a zip tie that goes through it and under the nose bridge of the mask frame. I have not used mine so can't tell you how well this works.