Catalina Pony Bottle Tanks with Pro Valve

Explanation on the Back Pressure Relief Feature

In course of using a scuba valve, there are times where excess air may have accumulated behind the face o-ring during normal use. When this air is not vented properly from the o-ring groove it can cause the o-ring to dislodge during regulator dismounting.

Sherwood valves feature an intentional stamping mark in the machined inner ring of the o-ring gland. This mark prevents the metal ring from sealing against the 1st Stage regulator and trapping pressurized gas in the o-ring groove. If this gas is not properly vented, it can force the o-ring to dislodge when the 1st stage is removed from the valve. The stamping mark creates a path to vent any trapped gas before the 1st stage is removed.

A pony bottle is a smaller tank, which is carried in addition to the main tank. It possesses its own regulator with first and second stage and sometimes a separate pressure gauge. It will is mounted either at ones side or in front of the body or fixed to the main tank. A pony bottle scuba tank is the only true redundant breathing mechanism you can completely rely on.

Depending on the type of diving you plan on doing will determine what capacity the redundant air supply needs to be. Leisure Pro offers five different size bottles to meet every divers requirements. If used for sport diving there are three choices 6, 13 and 19 cu ft cylinders. If deep or deep technical diving or wreck penetration or cave diving there are the 30 and 40 cu ft cylinders available.

The Pro Valve is one of the highest flow cylinder valves available today and is also a convertible valve. Whether you dive Yoke or DIN regulators this valve will work for both. Valve has easily removed 200 bar (3000 psi) DIN insert to convert the valve for use with DIN regulators. Valve has a heavy duty deign with a smooth operating mechanism and multi-ported burst disc plug for added safety.

Aluminum cylinders unlike steel cylinders don't rust, they oxidize. The oxidization of aluminum forms a protective coat that hinders the continuation of corrosion making aluminum cylinders less likely to be condemned due to excessive corrosion. When shipped the tanks valves will be removed and the tank will require re-inspection before being filled. The available cylinders have the following physical specifications:
Diameters:
6 cu. ft: 3.2" (8.13cm)
13 and 19 cu. ft: 4.38" (11.13cm)
30 and 40 cu. ft: 5.25 (13.34cm)
Height:
6 cu. ft: 10.8" (27.4cm)
13 cu. ft: 12.8" (32.5cm)
19 cu. ft: 17.40" (44.2cm)
30 cu. ft: 19.98" (50.75cm)
40 cu. ft: 24.85" (63.1cm)
Weight:
6 cu. ft: 2.6 lbs (1.18kg)
13 cu. ft: 5.7 lbs (2.59kg)
19 cu. ft: 7.8 lbs (3.5kg)
30 cu. ft: 13.7 lbs (6.2kg)
40 cu. ft: 15.9 lbs (7.2kg)
Buoyancy (Full):
6 cu. ft: -1.5 lbs (-680.4g)
13 cu. ft: -1.7 lbs (771g)
19 cu. ft: -1.3 lbs (589.7g)
30 cu. ft: -2.4 lbs (1.1kg)
40 cu. ft: -2.6 lbs (1.2kg)

Note:All Catalina cylinders are nitrox ready and meet certificated specifications of the US Department of Transportation (DOT) with DOT-3AL specification and Transport Canada Safety and Security (TC) with TC-3ALM specifications. Purchasers should check with other country requirements to know if the cylinders are certified for use in that country.