About Fantasea Moisture Detector
The½Fantasea Moisture Detector½can be installed inside any housing featuring sufficient space for the alarm unit. The½Fantasea Moisture Detector½is very sensitive, so whenever moisture is detected by the sensor, the moisture detector LED light begins flashing and a warning alarm starts beeping, thereby alerting the user of a possible leak. The½Fantasea Moisture Detector½includes an alarm unit and a moisture sensor unit, connected by a thin wire. The alarm unit is installed on any of the housing side panels using a double-sided installation sticker, included in the package. Make sure that your housing offers sufficient space for the alarm unit to be installed 1.34" x 0.9" x 0.28" (34mm x 24mm x 7mm) without interfering with a proper watertight seal. The Moisture Sensor unit is installed just under the camera or camera tray inside the housing. It is operated by a 3V Lithium #CR1220 battery. A replaceable and non-rechargeable battery is included.½
Important Notices:
All components should be handled carefully during installation. The Fantasea Moisture Detector assists with detecting moisture inside the housing. Installation of the Fantasea Moisture Detector inside the housing does not eliminate the user's responsibility of validating housing watertight seal prior to and during the dive.½Comes with installation instructions.
Warranty Information
This product has a limited warranty of 12 months.
http://www.fantasea.com/core/media/media.nl
989-785-0540
Fantasea Moisture Detector Features
- Fantasea Moisture Detector:
- Installed Inside Any Housing w/Sufficient Space for Alarm Unit
- Very Sensitive:
Whenever Moisture Detected by Sensor
Detector LED Light Flashing
Warning Alarm Beeps
Alerts User of Possible Leak - Includes Alarm Unit & Moisture Sensor Unit, Connected by Thin Wire
- Alarm Unit Installed On-Any of Housing Side Panels w/Included Double-Sided Sticker
- Dimensions: 1.34" x 0.9" x 0.28" (34mm x 24mm x 7mm)
- Note:
Make Sure Housing Offers Sufficient Space for Alarm Unit To-Be-Installed
Without Interfering w/Proper Watertight Seal - Moisture Sensor Unit: Installed Under Camera or Camera Tray Inside Housing
- Power: Non-Rechargeable 3V Lithium #CR1220 Battery (Included)
- Important Notices:
All Components Should-Be-Handled-Carefully During Installation
Does Not Eliminate User's Responsibility of Validating Housing Watertight Seal Prior-To & During Dive - Installation Instructions