About XS Scuba SeaBlazer BC
The SeaBlazer is a high-quality, weight-integrated, jacket style BC. By having the air cell wrap around the diver's torso, this BC will provide vertical orientation at the surface and excellent lift out of the water. The integrated Catch n' Release weight system is very easy to load, remains secure and easy to ditch. The neutral colors of the SeaBlazer allow the diver to accessorize with any color. Large utility pockets on either side have lowered #10 coiled zippers with dual zipper pulls for ease of entry. A scooped opening on the top, front of the right lobe is perfect for stowing and deploy an octopus. The octopus remains visible and secure throughout the dive. Some divers may find it useful to run their instruments behind the left pocket and out the scooped opening on the top, front of the lobe.
The two-piece waist band is adjustable in the back to accommodate a wide range of waist sizes. The Micro Inflator uses a drift pin design, which provides greater reliability and longevity than those inflators relying upon standard Schrader valves. 3 dump valves are available: a cable-activated rapid exhaust valve at the top of the airway, a right shoulder pull dump and a lower, rear pull dump. Inflator comes with a 3/8" threaded QD hose assembly. A clever two-piece backpack features a lowered tank band to better integrate with the BC's waist band. A tank positioning strap allows you to set your cylinder to the correct height every time. An integrated carrying handle is built into the backpack for easy lifting by buddy when donning and doffing. Knife mounting grommets on the left side accommodate an XS Scuba BC knife. Accessory attachment is made easy with the 6 stainless steel D-rings that provide many attachment options.
The Catch n' Release weight system has a capacity of 20 lbs. (9 kg) of soft or block weights. Non-releasable trim weight pockets found on the back of the SeaBlazer increase the overall weight capacity as well as provide better positioning in the water. Trim pockets have a weight capacity of 10 lbs. (4.5 kg). The BCD's harness is fully adjustable with torso, waist, and chest (sternum) straps all equipped with squeeze-style side-release buckles for easy donning and doffing. The SeaBlazer has a lift capacity between 24 lbs. and 36 lbs. (10.9 kg to 16.33 kg) depending on the BCD's size. The SeaBlazer air cell is made from 420D solution dyed nylon to resist fading. The harness is built from 600D Polytek fabric for fade and abrasion resistance. The SeaBlazer can accommodate XS Scuba's optional proprietary PLUS lighting system (see SKU: XSSBCRLCW). Small elastic loops that line the perimeter of the SeaBlazer BCD allow mounting of this unique lighting system. For SeaBlazer BCD with light system see SKU: XSSSBBCL. BCD comes with an owner's manual.
Warranty Information
This product has a limited warranty of 24 months.
https://www.xsscuba.com/warranty
714-424-0434
XS Scuba SeaBlazer BC Features
- XS Scuba SeaBlazer BC:
- High Quality, Weight-Integrated, Jacket Style BC
- Provide Vertical Orientation at Surface & Excellent Lift Out-of-the-Water
- Integrated Catch n' Release Weight System: Easy to Load, Remains Secure & Easy to Ditch
- Neutral Colors of SeaBlazer Allow Diver to Accessorize w/Any Color
- Large Utility Pockets: Lowered #10 Coiled Zippers w/Dual Zipper Pulls for Ease of Entry
- Scooped Opening On Top, Front of Right Lobe: Perfect for Stowing & Deploy an Octopus
- Octopus Remains Visible & Secure Thru-Out Dive
- Useful to Run Instruments Behind Left Pocket & Out Scooped Opening
- Two-Piece Waist Band: Adjustable-In-Back, Accommodates Wide Range of Waist Sizes
- XS Scuba Micro Inflator:
Inflator Mechanism Uses Drift Pin Design
Greater Reliability & Longevity than Schrader Valves - 3 Dump Valves:
Cable-Activated Rapid Exhaust Valve On-Power Inflator
Lower Rear & Shoulder Mount Pull Dumps - 3/8" Threaded QD Hose Assembly
- 2-Piece Back Pack Features Lowered Tank Band to Better Integrate w/BC's Waist Band
- Tank Positioning Strap Allows You to Set Cylinder to Correct Height Every Time
- Integrated Carrying Handle: Built into Back Pack for Easy Lifting for Assisted Donning/Doffing
- Knife Mounting Grommets Left Side
- 6 Stainless Steel D-Rings Provide Attachment Options
- Catch n' Release Weight System: Capacity 20 lbs. (9 kg) of Soft or Block Weights
- Non-Releasable Trim Weight Pockets Capacity 10 lbs. (4.5 kg)
- Harness Fully Adjustable w/Torso, Waist & Chest (sternum) Straps
- All Straps: Equipped w/Squeeze-Style Side-Release Buckles for Easy Donning & Doffing
- Lift Capacity: 24 lbs. & 36 lbs. (10.9 kg & 16.33 kg), Size Dependent
- Construction:
Air Cell: 420D Solution Dyed Nylon
Resist Fading
Harness: 600D Polytek Fabric
Fade & Abrasion Resistance - Owner's Manual
- Available w/XS Scuba's Optional Proprietary PLUS Lighting System (see SKU: XSSSBBCL)
- For Add-On Light Kit (see SKU: XSSBCRLCW)