|
Mfg Part Number :
208.1200 |
Hollis HTS Harness Technical System
- Crotch strap 2 inch webbing with vehicle hook ring (removable)
- Adjustable sternum strap with 2 chest mounting locations
- Adjustable Padded Shoulder Straps with Quick Release Buckles
- Compatible with Hollis Bladder Systems
- Removable Velcro cummerbund
- Back pad with lumbar support
- Stainless Steel D-rings
- Harness weight: 8lbs
- SIZE: Large
- Optional 20lb (2 x 10lb pockets) quick release weight pockets with stainless steel D-rings. See below to order
 FULL MANUFACTURER'S WARRANTY
- CLOSEOUT - LIMITED TO STOCK ON HAND -
Click for Hollis sizing chart
| | Retail:
$332.03
You Pay:
$179.95
You Save:
$152.08
|
|
Mfg Part Number :
HW1084Large |
Dive Rite Stainless Steel Cylinder Clamp
- Stainless Steel Tank Clamp
- 9/16-inch wide
- SIZES:
- Small for cylinders up to 5.5-inch diameter
 FULL MANUFACTURER'S WARRANTY
| | $6.25
|
|
Mfg Part Number :
HW1019 |
Dive Rite Stainless Steel D-Ring
- CLOSEOUT - LIMITED TO STOCK ON HAND -
| | $1.95
|
|
Mfg Part Number :
HW1039 |
Dive Rite Stainless Steel Boat Clip with Swivel
| | $6.95
|
|
Mfg Part Number :
HW1099 |
Dive Rite Ridgid Ring
- 2-inch rigid D-ring
- Remains in a fixed raised position for easy attachment
- Made to fit on 2 inch webbing
- Available in 45-degree bend
- FULL MANUFACTURER'S WARRANTY
| | $5.95
|
|
Mfg Part Number :
GM2780 |
Dive Rite Maximum Operating Depth Tank Wraps
- Set of two sleeves with clear slip pockets hold maximum operating depth markings
- Two sets of numbers allow divers to customize "MOD" in either feet or meters
- Sleeves attach onto stainless steel hose clamps-See below to order
- FULL MANUFACTURER'S WARRANTY
- CLOSEOUT - LIMITED TO STOCK ON HAND -
| | $62.95
|
|
Mfg Part Number :
208.1280 |
Hollis Switchback Scuba Harness
- 2" Webbing Harness
- Left Shoulder Buckle release
- 4 Adjustable shoulder SS Bent D-rings
- 2 Adjustable waist SS D-rings
- Crotch strap 2 inch webbing with vehicle hook ring (removable)
- 2" SS Cam Buckle
- Compatible with Hollis Bladder systems and backplates - sold separately
- Backplate not included-see below to order
- FULL MANUFACTURER'S WARRANTY
| | Retail:
$109.00
You Pay:
$98.00
You Save:
$11.00
|
|
Mfg Part Number :
208.1250.085 |
Hollis BAC Series (Bungee) Wing
- Streamlined design for reduced drag and passing through tight spaces
- 1000 Denier Cordura with PU Lamination Outer Shell & 15mm Urethane Internal Bladder
- Cam Band slots
- Centrally located elbow to avoid tank/regulator interference
- Comes with removable bungee straps
- Lower Left Pull Relief Valve
- For use with single or twin tanks
- Includes standard inflator
- Available in 85lb or Dual 85lb lift
- FULL MANUFACTURER'S WARRANTY
| | Retail:
$320.00
You Pay:
$287.95
You Save:
$32.05
|
|
Mfg Part Number :
BC1058-2 |
Dive Rite 2 inch Crotch Strap with Scooter Ring
- Keeps the BC secure while diving in an inverted position
- 2" webbing
- Two-inch nylon webbing-tensile strength 2,800lbs
- Eliminate gear slipping upward on your body
- Includes a neoprene sleeve to protect exposure suit from abrasion
- LENGTH: 42"
- FULL MANUFACTURER'S WARRANTY
| | Retail:
$21.50
You Pay:
$21.50
|
|
Mfg Part Number :
BC4100-16 |
Dive Rite Travel EXP Wing
- Enables users to better control the shape and lift characteristics of the air cell
- 1680 denier ballistic nylon that resists tears and abrasion
- Standard inflator with 16-inch rapid exhaust (pull dump)
- Made for use with the TransPac, Transplate or metal backplates
- LIFT: 27Lbs
- COLOR: Black with Gray accents
- FULL MANUFACTURER’S WARRANTY
| | $318.95
|
