|
Mfg Part Number :
00540 |
Deep Outdoors Power Inflator Hose Protector Sleeve
- Protect your power inflator corrugated and low pressure hoses
- Will fit over almost any manufactures power inflator corrugated and low pressure hoses
- Length 14 inches
- 1000 Denier Material
 FULL MANUFACTURER'S WARRANTY
| | $25.95
|
|
Mfg Part Number :
TK0201 |
Best Divers O2 Accessory Pocket
- Perfect whenever an additional storage pocket is required
- Easy to use carabineer clips securely to any D-ring
- Safety compartment allow to to divide 2 regulators (oxygen and mixture)
- Holds everything from safety sausage to collectable shells
- Tek divers will love the convenience of holding those extra long octo hoses
- Fits any BC or weight belt with standard 2 inch webbing
- DIMENSIONS: 4.5" x 6" x 1"
- CAPACITY: 27 cubic inches
- COLOR: Green
 FULL MANUFACTURES WARRANTY
| | $17.95
|
|
Mfg Part Number :
AC2019 |
Dive Rite Hose Clip Retainer
- This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light
- Simply thread the bungee loop through the eyelet of a snap, stretch around the hose, and bring the bungee loop over the tab
- Can be used on BCD pocket and luggage zippers
 FULL MANUFACTURER'S WARRANTY
| | $4.95
|
|
Mfg Part Number :
BC1059 |
Dive Rite Adaptor for 2 inch Transpac Crotch Strap
- The Crotch Strap Adapter allows a 2-inch crotch
strap to be installed on a TransPac harness.
- Includes stainless steel assembly screw.
- FULL MANUFACTURER'S WARRANTY
| | $14.95
|
|
Mfg Part Number :
BC1078 |
Dive Rite 1 Inch Webbing Loop with Stainless Steel Ring
| | $7.95
|
|
Mfg Part Number :
000-50 |
Poseidon Besea Accessory Pocket
- Easily accessible
- Simple to operate even when wearing gloves
- Mesh draining bottom
- Accessory pocket can be located where you want it
- Twist lock system ensures that pocket is easy to remove and replace underwater
- Security lanyards
- Durable ballistic nylon
- Reflective trim for increases visibility
 FULL MANUFACTURER'S WARRANTY
| | Retail:
$45.00
You Pay:
$34.95
You Save:
$10.05
|
|
Mfg Part Number :
03120 |
Deep Outdoors Expedition Pocket
- Fits any BC or weight belt with standard 2 inch webbing
- Heavy Duty Cordura
- Horizontal design
- Dual Zippered Pockets
- Drainage grommets
- Built in Knife Sheath (for use with a 5" blade)
- Reflective piping
- Web-loc attach
- DIMENSIONS: 9" x 7" x 3"
- CAPACITY: 189 cubic inches
- FULL MANUFACTURER'S WARRANTY
| | Retail:
$35.00
You Pay:
$9.95
You Save:
$25.05
|
|
Mfg Part Number :
BC2714 |
Dive Rite Clipper Pocket (Single)
- Holds up to 5lbs
- Fits any BC or weight belt with standard 2 inch webbing
- Locking clips prevent sliding
- Mount in any four positions
- DIMENSIONS: 5" x 5" x 1.5"
- CAPACITY: 37.5 cubic inches
- FULL MANUFACTURER'S WARRANTY
| | $27.50
|
|
Mfg Part Number :
H-BR |
OMS Bronze Round Ring
- Can be attached to a downline for clipping on accessories
- Connect to accessories for easier attachment
- SIZES: 1.5"
 FULL MANUFACTURER'S WARRANTY
| | $3.95
|
|
Mfg Part Number :
AC3215-32 |
Dive Rite Weight System Set
- Fits any BC (including the Dive Rite harness system) with standard 2 inch webbing
- Integrated Weight System - 32lb Diver releasable
- Large Velcro flap on holster for easy removal and replacement of weight pocket
- Grommet on bottom of holster and weight pocket for easy draining
- Includes: 2 weight pockets and 2 weight pocket holsters
- FULL MANUFACTURER'S WARRANTY
| | $123.95
|
