• Solid stainless steel construction
• For quick and easy attatchment or release of various diving equipment
• LENGTH: 4.25``

• Fastens to the stainless steel backplate, providing added comfort
• Useful when diving wet or without exposure protection
• Features a pocket that can be used to store the Halcyon Life Raft, Halcyon Surf Mat, or various lift bags.

• Unique outward bend to the outside corners of the backplate increase comfort by distributing the weight across a larger area.
• Square slots at the bottom of the plate allow reversal of the bolt from the single tank mounting plate, preventing an uncomfortable protrusion and permitting easier stowage and deployment of any item in the HALCYON backplate pocket.
• 5 lbs negative bouyancy
• HARNESS NOT INCLUDED

• Specially designed for mating with Pioneer wing on a single tank- no adaptor required!
• Backplate is available in six lbs. stainless steel and aluminum
• Utility holes allow mating with MC Storage Pak to stow a variety of lift devices
• Military-grade hardcoat protects the Halcyon aluminum backplate from corrosion and scratching

• Octogrip tank band provides a secure method of attaching D-rings, pony bottles, and tank adapters
• Grip is sewn into underside of the band, allowing greater positioning of accessories and prevents accidental loss
• Does not include Back plate (pictured)

• SIZES: 19"

• The inner bag is constructed from heavy duty NAVY raft material, coated on both sides with polyurethane sealant.
• The outer bag is constructed from super strong 1000 Denier RF Welded Cordura, greatly reducing the risk of damage to the inner bag.
• A 2 inch webbing reinforcement is sewn down the backbone of the wing, incorporating additional strength into the grommet position while greatly increasing structural support and reducing wear.
• A 2 inch "Mil spec" nylon strain relief is sewn around the top of the corrugated hose at the elbow entrance to the wing.

• Luna
• Universal single pocket
• FULL MANUFACTURER'S WARRANTY
  
  

• Seamlessly integrates with Halycon BC systems
• Neatly stows the Surf Shuttle and a variety of other lift devices

• All wings in the Pioneer system are bladderless and made of 1000 Denier Weldable Cordura, RF Welded, and edge stitched.
• A 2 inch webbing reinforcement is sewn down the backbone of the wing, incorporating additional strength into the grommet position while greatly increasing structural support and reducing wear.
• A 2 inch "Mil spec" nylon strain relief is sewn around the top of the corrugated hose at the elbow entrance to the wing. This practically eliminates the risk of total buoyancy loss due to elbow separation.
• A proper length corrugated hose prevents the snag prone posture of extra long hoses.

• Replacement for your BC
• FULL MANUFACTURER'S WARRANTY
  
  

• Quick and easy way to adapt your backplate to your single tank
• Includes two OctoGrip cam buckle straps
• Stainless steel adapter made as rugged structural U-Channel, allows reverse mounting of bolts to provide excess comfort and functionality

• Streamlined and Comfortable, Ideal for the Unique Requirements of Snorkelers
• Standard Inflator
• SIZES: Child (up to 100lbs), Adult (100-200lbs), XL Adult (200+ lbs)

• Everything you need to correctly set up your auxiliary cylinders for technical or overhead diving:
  • Two 1" stainless bolt snaps
  • 8.5" stainless tank band with stainless cylinder clamp to secure the tank
  • Six feet of heavy duty cord, with two feet of thick rubber to protect the hose
  • Thick tubular nylon covering for cylinder clamp to prevent exposure suit and bottle chafing
  • No metal neck rings; all attachment hardware can be cut free in case of entanglement or other emergency situations
• Tank not included

• Compact size
• Signal Underwater
• Fits all styles of BCs with breathable type inflator such as the Zeagle Octo+, Seaquest Air Source, Apeks, or Beuchat
• FULL MANUFACTURER'S WARRANTY

- CLOSEOUT -

• Replaces plastic cam buckles without the expense of buying a new tank strap
• Solid stainless steel, tumbled and polished to perfection
• Lifetime guarantee against breakage

• Promotes heads-up surface airway protection by counteracint the positive tendancy of buoyant cylinders.
• Can be adjusted along the length of the cylinder to improve diver trim under water
• Travel version allows weight fill at divesite
• Made from 1000 denier Cordura
• Includes: Super Cam Buckle Strap Set and Nonslip pad

• For Nekton 2000 BC
• Set of two pockets

• For DACOR Xtremelle/Nautica BCs
• Set of two pockets

• "Active Control Ballast" Weight pockets for Halcyon BC Systems
• Positive locking mechanism prevents accidental weight release and allows the diver or dive buddy to quickly release part or all of their ballast as the need requires
• Divers experiencing buoyancy problems can release part of their weight, eliminating a rapid ascent from the loss of an entire weight belt
• Rugged ballistic nylon fabric with molded handles
• 2`` side release Delrin buckles, made with true 3M Velcro

• "Active Control Ballast" Weight pockets for Halcyon BC Systems
• Positive locking mechanism prevents accidental weight release and allows the diver or dive buddy to quickly release part or all of their ballast as the need requires
• Divers experiencing buoyancy problems can release part of their weight, eliminating a rapid ascent from the loss of an entire weight belt
• Rugged ballistic nylon fabric with molded handles
• 2`` side release Delrin buckles, made with true 3M Velcro

• Free Safety Whistle included
• Ideal for the Unique Requirements of Snorkelers
• Streamlined and Comfortable
• Removable crotch strap keeps the vest from riding-up when inflated
• High Visibility Safety Yellow
• Scuba.com logo
• SIZES: Junior(up to 100lbs)
• FULL MANUFACTURER'S WARRANTY

• Ideal for the Unique Requirements of Snorkelers
• Streamlined and Comfortable
• Removable crotch strap keeps the vest from riding-up when inflated
• High Visibility Safety Yellow
• SIZE:  Adult(100-200lbs)
• FULL MANUFACTURER’S WARRANTY

• Free Large 16" x 19" Mesh Bag
• Kit Includes:
  • 8oz Wetsuit/BC Wash and Conditioner
  • 2oz Mask Defog - "Scuba Lab Testers Choice"
  • 4oz Stink Guard
  • 2oz Salt-Away
  • 2oz Mask Scrub
  • Lubricating Zipper Wax
• FULL MANUFACTURER’S WARRANTY

- CLOSEOUT - LIMITED TO STOCK ON HAND -

• Surface and Underwater Signaling Device
• On the surface a blast of sound that can be heard up to a mile away
• Great for getting your buddy's attention underwater
• Attaches between the power inflator and the low pressure hose
• Installation is easy and takes only a moment
• Specially designed, small, lightweight air horn
• Uses a small amount of air from your SCUBA tank to make a piercingly loud sound
• Comes in 1 BC style
  • Standard Type I - Fits all styles of BC's except if fitted with the a breathable type inflator
• FULL MANUFACTURER’S WARRANTY

- CLOSEOUT - LIMITED TO STOCK ON HAND -

• Use for carrying tools, knives, shears, strobes, cameras, slates, etc.
• 2 Retractor/Tool pockets - see below to order retractor
• Fits any BC or weight belt with standard 2 inch webbing or use the two included elastic leg straps
• Heavy Duty Cordura
• Large enough to fit a small porthole
• Hypalon bottom and zipper pulls
• Molded Heavy Duty handle
• Snap clip tabs
• Drainage grommets
• Built in knife shealth (for use with a 5" blade)
• DIMENSIONS: 15" x 14" x 4"
• CAPACITY: 600 Cubic Inches
• FULL MANUFACTURER'S WARRANTY

• Standard hose for your BC Power Inflator
• Works with all popular brands
• SIZES:  26 inch

• Ideal for the unique requirements of snorkelers
• Streamlined and comfortable
• Screw-down oral inflator
• Removable crotch strap keeps the vest from riding-up when inflated
• COLOR: High Visibility Safety Yellow
• SIZES: Small (up to 100lbs) or Large (100-200lbs)
• FULL MANUFACTURER'S WARRANTY

• Fits any BC or weight belt with standard 2 inch webbing or attaches to D-rings
• Heavy duty Cordura
• Dual adjustable carry cuffs for lift bags and pony bottles
• Snap clip tabs
• Zippered line deployment pocket with elastic pull tab
• Web-loc attach
• Dimensions: 11" x 9"
• FULL MANUFACTURER'S WARRANTY

• Zippered Weight Pouches
• Fits the Ripcord or Zip-touch weight systems - two required for each BC
• Provides a convenient way to manage your weights
• Stores multiple weights in one bag
• Easy way to release more than one weight at a time
• Helps prevent lose of individual weights
• COLOR: Yellow or Black
• FULL MANUFACTURER'S WARRANTY
  
  

• 360 bladder assembly for Zeagle Buoyancy Systems
• 1000 Denier Nylon
• Includes Inflator with 19" corrugated hose
• Lift 44 lbs.
• FULL MANUFACTURER'S WARRANTY

• Replaces your BC hose or Drysuit inflator hose
• Simple attachment without pulling back the colar
• Available in sizes: 22", 25", or 36"
• Will not work with Viking Drysuits
• FULL MANUFACTURER’S WARRANTY

• The most effective and convenient surface signaling device available
• Attaches between the power inflator and the low pressure hose
• Installation is easy and takes only a moment
• Specially designed, small, lightweight air horn
• Uses a small amount of air from your SCUBA tank to make a piercingly loud sound
• Comes in 3 BC styles
  • Standard Type I - Fits all styles of BC's except if fitted with the a breathable type inflator
  • Type II - Fits Aeris Air Link, Oceanic Air XS2, Zeagle Octo+, Aqualung Air Mic, Seaquest Air Source, Apeks Octo+ or Beuchat Venturi
  • Type III - Fits Sherwood Gemini, Tusa Duo-Air, DiveRite RiteSource, H2Odyssea Inflator plus, Atomic SS1 or Scuba Pro Air II, Zeagle Octo Z
  • FULL MANUFACTURER’S WARRANTY

And the reviews are in:
"At Cocos Island the currents can be wild. I surfaced over 100 yards away from the pickup Zodiac. One blast from my Dive-Alert and they saw me. It's simply attached, effective and could be a life saver. I wouldn't leave home without it." -Stan Waterman / Underwater Cinematographer

• Enables users to better control the shape and lift characteristics of the air cell
• Designed for use with technical diving systems
• Retraction bands help streamline for absolute minimal drag
• Dual easy to reach rear lower dump valve
• Heavy duty 1000 denier material for superior abrasion/puncture resistance
• Superior balance and trim characteristics 
• SIZES: 45lb, 60lb, 94lb
• COLORS: 45 lb, 60 lb Black Only, 94 lb Black or Red
• FULL MANUFACTURER'S WARRANTY

• 5lb capacity for each pocket (10 lbs total)
• Webbing on back to attach to harness or weight belt
• Non-ditchable weight pockets
• FULL MANUFACTURER’S WARRANTY

• Compatible with Dacor & Mares 1 inch corrugated hose styles and all other 1 inch corrugated hose styles
• FULL MANUFACTURER'S WARRANTY

• Instant long range communication using simple codes
• Positive directional sensing
• Distinctive low pitched buzz
• Marine life friendly
• Consistent performance with increasing depth
• Comes in 3 styles 
  • Standard Type I -Fits all styles of BC's except if fitted with the a breathable type inflator 
  • Type II-Sherwood Gemini, Tusa Duo-Air, DiveRite RiteSource,Zeagle OctoZ, H2Odyssea Inflator plus, Atomic SS1 or Scuba Pro Air II
  • Type III- Fits Aeris Air Link, Oceanic Air XS2, Zeagle Octo+, Aqualung Air Mic, Seaquest Air Source, Apeks Octo+ or Beuchat Venturi
• FULL MANUFACTURER'S WARRANTY

• Securely bonds to neoprene, metal, BCD fabrics, rubber and plastics
• 1 FL. OZ.
• COLORS: White, Black, Glow-in-the-dark, Neon Orange, Neon Pink, Red, Bright Blue, Purple, Neon Yellow and Neon Green
• FULL MANUFACTURER'S WARRANTY

• Replacement weight pocket set for the TUSA Platina Evolution
• Size: One Size Fits All
• FULL MANUFACTURER'S WARRANTY
  
  

• For use with Poseidon BESEA BC
• Weight pocket can be located where you want it
• Easy to use release system
• 13 pound capacity
• 1000 Denier
• FULL MANUFACTURER'S WARRANTY

• For use with any BC that has a 2 inch webbing harness
• Fits over straps to increase comfort on shoulders
• Keeps nylon straps from scraping or pinching the shoulders
• Less wear and tear on divesuits
• One size fits all
• FULL MANUFACTURER'S WARRANTY

• Enables divers to carry slates, tools, or spare masks
• Fits any BC or weight belt with standard 2 inch webbing 
• 420 Denier
• Reflective strip for visibility
• Drainage Grommet
• Two D-rings inside pocket
• Heavy duty zipper
• DIMENSIONS: 9.5" x 7" x 3.5"
• CAPACITY: 233 cubic inches
• FULL MANUFACTURER'S WARRANTY

• Cummerbund completely encircles the waist
• COLOR: BLACK
• SIZE: Medium/Large - 30"

- CLOSEOUT - LIMITED TO STOCK ON HAND -

• Seals most Polyurethane Nylon BCs, Dry Bags, Snorkeling Vests, or Safety Tubes
• Compact and easy to carry
• KIT INCLUDES:
  • Primer 
  • BCD Seal 
  • 4 Polyurethane Patches
  • 4 Nylon Patches
  • 4 PVC Patches
• FULL MANUFACTURER’S WARRANTY

• Use to remove residual odors and bacteria from your wet suit
• Can be used on: Wet suits, dry suits, boot liners, neoprene gloves and booties, Polar fleece, polypropylene, BCD's, masks, fins, snorkels, and more.
• Helps eliminate saltwater, chlorine, sweat, and other residue
• Maintains wetsuit suppleness, keeps colors bright and eases suit entry
• SIZES: 8 oz, 1 Gallon*
• FULL MANUFACTURER'S WARRANTY

*Shipping Surcharge (In ADDITION to your normal shipping charges)
*Gallon Size Only

• Ground Shipping Surcharge: $14.95
• ThreeDay Shipping Surcharge $23.95
• NextDay Shipping Surcharge $41.95
• Next Day AM or Next Saturday AM Shipping Surcharge: $64.95

• Fills standard tires
• Attaches easily to low pressure hose
• Perfect item for your save a dive kit
• Type available
  • Standard Type I -Fits all styles of BC's except if fitted with the a breathable type inflator 
• FULL MANUFACTURER'S WARRANTY

• Allows a diver with Mitts or Gloves to locate and grasp the Zipper Pull
• Perfect for BCD Pockets, Wetsuit Zippers and accessory pockets
• 8 balls / bungee cords per package
• FULL MANUFACTURER'S WARRANTY

• Weight Pocket set for the Tusa Platina BC
• FULL MANUFACTURER'S WARRANTY
  
  

• Fits any BC or weight belt with standard 2 inch webbing
• Heavy Duty Cordura
• Adjustable Carry Cuff for Lift Bags and Pony Bottles
• Snap clip tabs
• Web-loc attach
• Does not include lift bag as shown
• Dimensions: 10" x 4 1/2"
• FULL MANUFACTURER'S WARRANTY

• FULL MANUFACTURER'S WARRANTY
  
  
  
  
  

• For divers who frequently switch between double tank and single tank rigs
• Constructed of marine grade stainless steel
• WEIGHT: 1.1 lbs
• Does not include cam straps - see below to order
• FULL MANUFACTURER'S WARRANTY

• Stainless back plate
• Allows for optional twin tank mounting
• Single tank adapter/Pony tank mount
• All necessary hardware
• FULL MANUFACTURER'S WARRANTY

• Quick disconnect on the end of the retractor
• Holds your smaller lights or slates
• Extends to 18 inches
• FULL MANUFACTURER'S WARRANTY

- CLOSEOUT - LIMITED TO STOCK ON HAND -

• Attaches directly to your tank or BC 
• Sleeve style
• Heavy Duty Cordura
• Adjustable lasso bottleneck strap
• Web-loc attachment
• SIZES: Small (6 cubic feet) or Large (13 cubic feet)
• Tank and valve not included  
• FULL MANUFACTURER'S WARRANTY

• Sternum strap for Sherwood BCs
• FULL MANUFACTURER'S WARRANTY
  
  

• Adds an additional pocket to carry your mask or any accessories
• Fits any BC or weight belt with standard 2 inch webbing
• Web-loc attach
• Padded interior
• Heavy Duty Cordura
• Drainage grommet on sides
• DIMENSIONS: 9" x 4" x 3"
• CAPACITY: 108 cubic inches
• FULL MANUFACTURER'S WARRANTY

• Pneumatic power strap system
• Simple and easy to use
• Fits any BC with a single cylinder band
• Connect your BC inflator hose to the Airlock system and the Pneumatic power strap system will lock your tank into position - your tank will never slip again
• One finger CAM release
• Tank, BC and power inflator hose not included
• Adapter for Aeris Air Link, Oceanic Air XS2, Aqualung Air Mic, Seaquest Air Source,Zeagle Octo+, Apeks Octo+ or Beuchat Venturi (see below to order)
• Adapter for Sherwood Gemini, Tusa Duo-Air, H2Odyssea Inflator plus,Diverite Ritesource, Zeagle Octo Z, Scuba Pro Air II, or Atomic SS1 (see below to order)
• FULL MANUFACTURER'S WARRANTY

  
• Standard hose for your BC Power Inflator
• An average life 3 times longer than traditional hoses
• Excellent resistance to abrasion
• Light and extremely flexible
• COLOR: Black
• Available in: 18-inch
• FULL MANUFACTURER’S WARRANTY

• Attachement screws for BC's and Backpads
• FULL MANUFACTURER'S WARRANTY

• Adds an additional pocket to carry your flashlight or any accessories
• Fits any BC or weight belt with standard 2 inch webbing
• Closes securely with a slide/release fastener
• DIMENSIONS: 5.5" x 3" x 2" (Small), 8.5" x 3" x 2" (Large)
• CAPACITY: 33 cubic inches (Small), 51 cubic inches (Large)
• SIZES: Small or Large
• FULL MANUFACTURER'S WARRANTY

• Marine grade 316 stainless steel D-Ring
• Available in
  • 1 inch
• FULL MANUFACTURER'S WARRANTY

- CLOSEOUT - LIMITED TO STOCK ON HAND -

• Heavy duty zipper
• Fits any Oceanic BC (except OceanPro)
• 1000 Cordura
• Stainless grommet for quick water drain
• DIMENSIONS: 3" x 6" x 9"
• CAPACITY: 162 cubic inches
• FULL MANUFACTURER’S WARRANTY

• For use with any 2" webbing or tank band
• Zippered pouch holds up to 5lbs
• Trim weight pockets for improved weight distribution and balance
• 10 lbs (2 x 5lb pockets) Non-diver releasable trim weights pockets for improved weight distribution and balance 
• Sold in pairs 
• FULL MANUFACTURER’S WARRANTY

- CLOSEOUT - LIMITED TO STOCK ON HAND -

• Fits any BC (including the Dive Rite harness system) or weight belt with standard 2 inch webbing
• Adds an additional pocket to carry your mask and/or equipment
• Closes securely with a slide/release fastener
• DIMENSIONS: 9" x 4" x 2"
• CAPACITY: 72 cubic inches
• FULL MANUFACTURER'S WARRANTY

• Mounts near top of the harness behind the shoulders for an improved horizontal profile underwater
• Attaches to the back of a Dive Rite BC's
• Lead included 
• Helps keep you balanced
• 1000 denier nylon
• 5" high x 3" wide x 1" deep
• SIZE: 3 lbs
• FULL MANUFACTURER'S WARRANTY
  
  

• Ideal for the Unique Requirements of Snorkelers
• Streamlined and Comfortable
• Removable crotch strap keeps the vest from riding-up when inflated
• High Visibility Safety Yellow
• Fits adults 100-200lbs
• FULL MANUFACTURER'S WARRANTY

• Fits any BC or weight belt with standard 2 inch webbing or attaches to D-rings
• Expedition pocket for carrying tools, knives, shears, strobes, cameras, slates, etc.
• Adjustable carry cuff for lift bags or pony bottles
• Heavy duty cordura
• Horizontal design
• Dual zippered pockets
• Drainage grommets
• Built in 5" blade Knife Sheath (see below to order)
• Reflective piping
• Web-loc attach
• Does not include lift bag as shown
• POCKET DIMENSIONS: 9" x 7" x 3"
• POCKET CAPACITY: 189 cubic inches
• FULL MANUFACTURER'S WARRANTY

• Attaches to your BC Low Pressure Hose
• Great idea to blow sand and salt water off your gear
• A must for your Save A Dive Kit
• Comes in 3 styles
  • Standard Type I -Fits all styles of BC's except if fitted with the a breathable type inflator   
  • Type II-Fits Sherwood Gemini, Tusa Duo-Air, DiveRite RiteSource, H2Odyssea Inflator plus, Atomic SS1 or Scuba Pro Air II
  • Type III- Fits Aeris Air Link, Oceanic Air XS2, Zeagle Octo+, Aqualung Air Mic, Seaquest Air Source, Apeks Octo+ or Beuchat Venturi
• FULL MANUFACTURER'S WARRANTY

• 2 pockets per set
• Each pocket holds 11 lbs
• Works with Beuchat:
  • Masterlift Tec bc
  • Masterlift Evolution bc
• FULL MANUFACTURES WARRANTY

• Easy to use, hoses snap in and out of the holder
• Keeps gauges and regulators right where you put them
• Quick clip design makes it easy to place the holder where needed
• FULL MANUFACTURER'S WARRANTY

• Holds everything from octo's and safety sausage to collectable shells
• Easy to use carabineer clips securely to any D-ring
• Great for providing safety for those extra long octo hoses
• Fits any BC or weight belt with standard 2 inch webbing
• DIMENSIONS: 4.25" x 6.5" x 1"
• CAPACITY: 27.63 cubic inches
• COLOR: Yellow
• FULL MANUFACTURES WARRANTY

• Marine Grade Stainless Steel
• Designed for saltwater use
• Perfect for attaching items semi-perminantly
• SIZES: 1"
• FULL MANUFACTURER'S WARRANTY

• Marine grade 316 stainless steel
• Fits on all open-ended 2" webbing straps on any B.C.
• Attachment point for BC accessories
• FULL MANUFACTURER'S WARRANTY

• Ideal for slates, dive tables, pocket lights and seeme floats
• Fits any BC or weight belt with standard 2 inch webbing
• Mesh Material
• Closes securely with a heavy duty zipper
• Interior one-inch D-ring secures car keys or other small items
• Extra BC pocket for storage
• COLOR: Black
• FULL MANUFACTURER'S WARRANTY

• Fits any BC or weight belt with standard 2 inch webbing
• Heavy Duty Cordura
• Pleated pocket
• snap clip tabs
• Web-loc attach
• DIMENSIONS:4 1/2" x 9"
• CAPACITY: 67 cubic inches
• FULL MANUFACTURER'S WARRANTY

• Kit consists of a pair (2) of pre-bent D-rings with Sideplates
• Attaches to the shoulder strap base plates of either a TransPac harness or a TransPlate harness
• Commonly used is attach stage cylinders
• Fits any BC or weight belt with standard 2 inch webbing  
• FULL MANUFACTURER'S WARRANTY

• Protect your power inflator corrugated and low pressure hoses
• Will fit over almost any manufactures power inflator corrugated and low pressure hoses
• Length 14 inches
• 1000 Denier Material
• FULL MANUFACTURER'S WARRANTY

• Perfect whenever an additional storage pocket is required
• Easy to use carabineer clips securely to any D-ring
• Safety compartment allow to to divide 2 regulators (oxygen and mixture)
• Holds everything from safety sausage to collectable shells
• Tek divers will love the convenience of holding those extra long octo hoses
• Fits any BC or weight belt with standard 2 inch webbing
• DIMENSIONS: 4.5" x 6" x 1"
• CAPACITY: 27 cubic inches
• COLOR: Green
• FULL MANUFACTURES WARRANTY

• This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light
• Simply thread the bungee loop through the eyelet of a snap, stretch around the hose, and bring the bungee loop over the tab
• Can be used on BCD pocket and luggage zippers
• FULL MANUFACTURER'S WARRANTY

• The Crotch Strap Adapter allows a 2-inch crotch
  strap to be installed on a TransPac harness.
• Includes stainless steel assembly screw.
• FULL MANUFACTURER'S WARRANTY

• One inch webbing
• Quick release buckle
• Stainless steel scooter ring
• FULL MANUFACTURER'S WARRANTY

• Easily accessible
• Simple to operate even when wearing gloves
• Mesh draining bottom
• Accessory pocket can be located where you want it
• Twist lock system ensures that pocket is easy to remove and replace underwater
• Security lanyards
• Durable ballistic nylon
• Reflective trim for increases visibility
• FULL MANUFACTURER'S WARRANTY

• Fits any BC or weight belt with standard 2 inch webbing
• Heavy Duty Cordura
• Horizontal design
• Dual Zippered Pockets
• Drainage grommets
• Built in Knife Sheath (for use with a 5" blade)
• Reflective piping
• Web-loc attach
• DIMENSIONS: 9" x 7" x 3"
• CAPACITY: 189 cubic inches
• FULL MANUFACTURER'S WARRANTY

• Holds up to 5lbs
• Fits any BC or weight belt with standard 2 inch webbing
• Locking clips prevent sliding
• Mount in any four positions
• DIMENSIONS: 5" x 5" x 1.5"
• CAPACITY: 37.5 cubic inches
• FULL MANUFACTURER'S WARRANTY

• Can be attached to a downline for clipping on accessories
• Connect to accessories for easier attachment
• SIZES: 1.5"
• FULL MANUFACTURER'S WARRANTY

• Fits any BC (including the Dive Rite harness system) with standard 2 inch webbing
• Integrated Weight System - 32lb Diver releasable
• Large Velcro flap on holster for easy removal and replacement of weight pocket
• Grommet on bottom of holster and weight pocket for easy draining
• Includes: 2 weight pockets and 2 weight pocket holsters
• FULL MANUFACTURER'S WARRANTY
  
  

• Universal single pocket - works on either right or left pocket
• Compatible only with 2001Genesis Velcro style BC's:
  • 10lb for the Medium and Large Phantom, Medium Athena and Small Recon
  • 15lb for the XLarge and 2XLarge Phantom and the Medium, Large and XLarge Recon
• FULL MANUFACTURER'S WARRANTY
  
  

• Replacement chest strap for the Transpac BC
• Quick release buckle included
• Easily adjustable
• FULL MANUFACTURER'S WARRANTY

• Allows divers to transform existing TransPac harness and wing into a rig capable of sidemounting tanks
• Works with the Nomad buttplate
• Tanks are mounted to buttplate and are held in place by tank bungees
• Available sizes:
  • 11", 13", 15" for petite divers
  • 17" standard length for most divers
  • 19" for large, broad-chest divers
• Snap available in Medium or Large
• FULL MANUFACTURER’S WARRANTY

• Stainless steel construction
• Identical assembly as Transpqac II harness
• FULL MANUFACTURER'S WARRANTY

• Back pad for ultimate comfort with a back plate
• 8 Book screws to attach pad to plate
• Stash lift bags or marker buoys between plate and pad
• Fits all OMS backplates
• FULL MANUFACTURER'S WARRANTY

• Works with any Mares BC that accepts the MRS-Mechanical Release System
• Mechanical release weights pockets for Dragonfly, Morphos & Vector 1000
• Easy to use single button release
• SIZES: XSmall/Small (8 pounds) and Medium/Large/XLarge (11 pounds)

- CLOSEOUT - LIMITED TO STOCK ON HAND -

• FULL MANUFACTURER'S WARRANTY
  
  

• Stainless steel
• Tank cam band slots
• Doubles mounting slot
• Mounting slot for 1" or 2" crotch strap
• Perimeter mounting holes
• FULL MANUFACTURER'S WARRANTY

• 2-inch rigid D-ring
• Remains in a fixed raised position for easy attachment
• Made to fit on 2 inch webbing
• Available in 45-degree bend
• FULL MANUFACTURER'S WARRANTY

• Measures 3"
• Marine grade 316 stainless steel
• Fits any BC or weight belt with standard 2 inch webbing  
• Attachment point for accessories to hang down from BC
• FULL MANUFACTURER’S WARRANTY

• Marine grade 316 stainless steel
• Ideal for sidemount divers attaching tank bungees
• Attaches to shoulder harness and easier attachment for bailout bottles
• FULL MANUFACTURER’S WARRANTY

• Includes backplate mounting screws
• Mounts argon bottle for drysuit inflation or small pony bottle
• Will hold either 6CF or 13CF tank
• Mounts to backplate holes for easy installation
• Mounts on either side of backplate behind the wearers arm
• Quick release allows bottle removal for quick deployment if necessary
• Tank not included
• FULL MANUFACTURER'S WARRANTY

• Making diving even easier
• Strong and secure spring-loaded bar snap - holds your gear in place
• Stainless Steel
• SIZE: 3 1/4 inch
• FULL MANUFACTURER'S WARRANTY

• Fits any BC or weight belt with standard 2 inch webbing
• Closes securely with Velcro flap
• Heavy Duty Cordura
• Horizontal design
• Drainage grommets
• Dimensions: 10" x 6" x 2.5"
• Capacity: 150 cubic inches
• FULL MANUFACTURER'S WARRANTY
  
  

• For use with any BC that has a 2 inch webbing harness
• Neoprene pads fit over straps to increase comfort on shoulders
• Keeps nylon straps from scraping or pinching the shoulders
• Less wear and tear on divesuits
• One size fits all
• LENGTH: 12"
• FULL MANUFACTURER'S WARRANTY

• Streamlined design for reduced drag and passing through tight spaces
• 1000 Denier Cordura with PU Lamination Outer Shell & 15mm Urethane Internal Bladder
• Cam Band slots
• Centrally located elbow to avoid tank/regulator interference
• Comes with removable bungee straps
• Lower Left Pull Relief Valve
• For use with single or twin tanks
• Includes standard inflator
• Available in  85lb or Dual 85lb lift
• FULL MANUFACTURER'S WARRANTY

• Keeps the BC secure while diving in an inverted position
• 2" webbing
• Two-inch nylon webbing-tensile strength 2,800lbs
• Eliminate gear slipping upward on your body
• Includes a neoprene sleeve to protect exposure suit from abrasion
• LENGTH: 42"
• FULL MANUFACTURER'S WARRANTY

• Works with the following models
  Dacor Rig II - All Models
  Genesis Recon - All Models
  Genesis Talon - All Models
  Sherwood Outback - 2001 & 2002 models
• Extend any of the above models from a XL/2XL to a 2/3XL - for 52" to 60" waists
• FULL MANUFACTURER'S WARRANTY
  
  

• Quick release waist buckle
• Shoulder and waist D rings
• Cross-chest strap and shoulder-strap pivot rings for increased comfort
• Quick-release buckle on the chest straps
• FULL MANUFACTURER'S WARRANTY

• Does not come with quick release straps
• Cross-chest strap and shoulder-strap pivot rings for increased comfort
• Shoulder and waist D rings
• FULL MANUFACTURER'S WARRANTY

• Enables users to better control the shape and lift characteristics of the air cell
• 1680 denier ballistic nylon that resists tears and abrasion
• Standard inflator with 16-inch rapid exhaust (pull dump)
• Made for use with the TransPac, Transplate or metal backplates
• LIFT: 27Lbs
• COLOR: Black with Gray accents
• FULL MANUFACTURER’S WARRANTY

• Used for decompression or safety stops
• Easy to deploy and store
• Stainless steel carabiner
• Fits any BC or weight belt with standard 2 inch webbing
• LENGTH: 6 feet
• FULL MANUFACTURER'S WARRANTY

• Standard hose for your BC Power Inflator
• Works with all popular brands
• SIZES: 9 inch or 15 inch
• COLORS: Black 
• FULL MANUFACTURER'S WARRANTY

• Leaves B.C.D. shell, interior lining, hose and valves conditioned
• Prolongs life of B.C.D.
• SIZE: Gallon
• FULL MANUFACTURER'S WARRANTY

*Shipping Surcharge (In ADDITION to your normal shipping charges)

• Enables divers to carry slates, tools, or spare masks
• Fits any BC or weight belt with standard 2 inch webbing and/or two elastic leg straps
• Closes securely with Velcro flap
• 1000 Denier
• DIMENSIONS: 10" x 6" x 2"
• CAPACITY: 120 cubic inches
• FULL MANUFACTURER'S WARRANTY

• Set of 2 cam straps
• Accomodates 7.25-inch or 8-inch tanks
• Marine grade stainless steel buckles
• 2" wide nylon webbing
• LENGTH: 36 inches
• Tank not included
• FULL MANUFACTURER'S WARRANTY

• Great for the traveling diver
• Modular design allows for individual customization
• Highly adjustable
• Double tank bands for single tank included
• Shoulder, waist and backplate D-rings
• 1000 Denier Ballistic Material
• SIZES: XSmall through 2XLarge
• COLOR: Black
• Designed to be used with any wing in the Dive Rite line
• FULL MANUFACTURER'S WARRANTY

• One size fits all
• Heavy duty Denier
• Protects your BCD corrugated hose from abrasion or snags
• STYLES: Plain or Print 'Backup'
• FULL MANUFACTURER'S WARRANTY

• Secures Transpac harness and air cells to nearly any set of doubles
• Quick and easy attachment
• FULL MANUFACTURER'S WARRANTY

• Fits TUSA Liberator BC
• FULL MANUFACTURER’S WARRANTY

• The TransWeight 16 can hold up to 8 pounds of lead per pocket
• 1680 Denier
• Fits any BC or weight belt with standard 2 inch webbing and/or two elastic leg straps
• Angled holsters allow for quick draw of weight pockets in any position
• Easy to hand off weights or ditch them in an emergency
• DIMENSIONS: 9" x 3.5" x 1.5"
• CAPACITY: 47.25 cubic inches
• FULL MANUFACTURER'S WARRANTY

• One-inch nylon webbing-tensile strength 2,800lbs
• Eliminate gear slipping upward on your body
• Stainless steel ring for attaching scooter leash
• Length: 42''
• FULL MANUFACTURER'S WARRANTY

• Replacement power inflator for your BC
• Compatible with BCs with 3/4 inch corrugated hoses
• Ergonomically designed for ease of use
• FULL MANUFACTURER'S WARRANTY

• Fits any BC or weight belt with standard 2 inch webbing or attaches to D-rings
• Enables divers to carry slates, tools, or spare masks
• Heavy duty zipper
• Heavy duty Cordura
• DIMENSIONS: 8" x 6" x 2"
• CAPACITY: 96 cubic inches
• FULL MANUFACTURER'S WARRANTY

• A convenient easy to use BC pocket
• COLOR: Blue with Black Accents

• Universal single pocket - works on either right or left pocket
• Second generation CQR-2 Weight Pocket is only compatible Genesis 2005 and newer BCD's
• Sizes of the CQR pocket: 7lb, 8lb, 10lb, 13lb
• FULL MANUFACTURER'S WARRANTY

• Models:
  • Recon - 1996 to 2000 Velcro syle models
  • Single Pocket
• Sizes: XS/SM (10lb) or MD/LG/XL/2XL (15lb)
• FULL MANUFACTURER'S WARRANTY
  
  

• FULL MANUFACTURER'S WARRANTY
  
  

• Provides stability
• Allows inverted diver attitude without upward slipping
• Dual end quick release for rapid off and on
• Fully adjustable
• Works with the following models:
  Genesis Recon - All models
  Genesis Talon - All models
  Sherwood Outback - 2001 & 2002 & 2003 models
  
• FULL MANUFACTURER'S WARRANTY
  
  

• Spare nuts and bolts for your rig
• One complete set
• Never miss a dive!
  Genesis Recon - All models
  Genesis Talon - All models
  Sherwood Outback - 2001 & 2002 models
  
• FULL MANUFACTURER'S WARRANTY
  
  

• Intergrated Weight System, Utility Pocket, a knife or shears pocket, all combined into one
• Attaches to your harness round ring via a swivel clip, distributing the weight to your shoulders.
• Made from Cordura backed with Polyurethane
• FULL MANUFACTURER'S WARRANTY

• 2 inch slots along center allow for cam bands, eliminating the need for a single tank adapter
• Accomodates Single or Twin cylinder configurations
• 11 inch on-center holes accomodate most manufacturer's twin tank adapters
• Mounting slot for 1" or 2" crotch strap
• Perimeter holes allow for secure attaching of accessories
• Weight 6lbs
• Available: Stainless Steel
• FULL MANUFACTURER'S WARRANTY

• Replaces worn out or damaged cummerbund
• Fits most BCs
• Diver installable
• SIZE: 2XSmall only
• FULL MANUFACTURER'S WARRANTY

• Will fit over Dacor or Mares style BC's with hard backpacks
• FULL MANUFACTURER'S WARRANTY
  
  

• Air powered underwater signaling device
• Audible range 25 - 75 feet
• Not effective on surface
• Marine life friendly
• See how it works
  
• Consistent performance regardless of depth  
• Type III- Aeris Air Link, Oceanic Air XS2, Zeagle Octo+, Aqualung Air Mic, Seaquest Air Source, Apeks Octo+ or Beuchat Venturi
• FULL MANUFACTURER'S WARRANTY

- CLOSEOUT - LIMITED TO STOCK ON HAND -

• Models:
  • Magnum - 1996 to 2000 weight integrated models
  • Set of two pockets
• FULL MANUFACTURER'S WARRANTY

- CLOSEOUT - LIMITED TO STOCK ON HAND -