|
Mfg Part Number :
GM2777 |
Dive Rite Mod 130 Tank Wrap
- Easily identify the gas in your cylinder or operating depth
- Elastic hose retainers
- Two 18" stainless steel clamps with sleeves - See how it works
- Fits a variety of standard size tanks
- Small tank wraps will fit aluminum 30- and 40-cubic-foot, and most steel 40-cubic-foot cylinders (and their metric equivalents)
- Standard tank wraps will fit steel 71.2-cubic-foot and aluminum 80-cubic-foot cylinders (and their metric equivalents)
- Click here to see how it works
- STYLES:
- Small 130 - (fits 5.25" diameter tank)
- Standard 130 - (fits 7.25" diameter tank)
- COLORS: Black
 FULL MANUFACTURER'S WARRANTY
| | $24.15
|
|
Mfg Part Number :
A-495 |
OMS 1 inch Soft Tank Neck Strap
| | $5.95
|
|
Mfg Part Number :
VX18 |
XS Scuba Modular Scuba Valve Plug
- Used on XS Scuba Modular International Valves Only
- Available for right or left hand valves (see below to order)
 FULL MANUFACTURER’S WARRANTY
| | $14.95
|
|
Mfg Part Number :
GM2766-2 |
Dive Rite Remora Independent Doubles Kit
- Used to quickly and easily mount and detach pony bottles or to configure independent doubles
- One-touch, quick release allows divers to change cylinders easily
- Includes mounting blocks for tanks with 5.5-inch (14 cm) to 8-inch (20.3 cm) diameters
- Color coded for easy installation. The blue cylinder pad is designed to lie against the primary tank, while the yellow cylinder pad is for smaller pony bottles
- Includes four blue cylinder mounting pads and two yellow cylinder pads, four cam straps and bolt kit
- FULL MANUFACTURER'S WARRANTY
| | $249.95
|
|
Mfg Part Number :
LP-602253-AF |
Lawrence Factor Co Cop
- CO is colorless and tasteless and can be detected with the CO COP
- It attaches to your air tank quickly, as simply as a regulator
- Includes One replaceable capsule that can test up to 10 air samples
- If the air is contaminated by CO, the Capsule will change color
- Even the most diligent air station operator can fall prey to circumstances, beyond their control, where high levels of CO could be generated un-noticed
| | $109.95
|
|
Mfg Part Number :
SYH3030 |
Sherwood SCBA to Scuba Fill Adapter
- 3000 PSI
- Fill your SCBA bottles at any Scuba refill station
- O-ring seal at Scuba adapter end
- Mates with any SCBA bottle
 FULL MANUFACTURER'S WARRANTY
| | $79.95
|
|
Mfg Part Number :
GM1037-SET |
Dive Rite Double Band Kit
- For 7.25" or 8" tank cylinders
- Beveled edges that minimize scratching of painted tanks
- Constructed of 18-gauge 304 stainless steel
- Stainless steel all-thread bolt kit
- Complete kit including 2 bands and 2 sets of hardware
- FULL MANUFACTURER'S WARRANTY
| | $159.95
|
|
Mfg Part Number :
05070 |
Deep Outdoors Oxygen Analyzer
- Free Protective Carrying Case included
- Easy Operation
- Compact, durable, o-ring sealed, ABS case
- Completely sealed "splashproof" unit
- Built in flow restrictor
- Gas calibration for air or pure oxygen
- On/Off/On with backlight
- Very easy sensor and battery replacement
- Fast response, long life sensor
- Temperature range 32-122F
- Expected battery lifetime of 2 years
- User replaceable batteries - see below to order
- Low Battery Warning
- Resolution 0.1% O2
- Measurement Range 0.1-100% O2
 FULL MANUFACTURER'S WARRANTY
| | $350.00
|
|
Mfg Part Number :
V164-30 |
OMS Remote Valve Knob Assembly
- Flexible stainless steel cable assembly
- Allows for easy access and activation of the isolator knob on a manifold
- Can easily be placed over the shoulder or under the arm
- Instant on/off action
- Low friction derlin knob
 FULL MANUFACTURER'S WARRANTY
| | Retail:
$131.77
You Pay:
$104.95
You Save:
$26.82
|
|
Mfg Part Number :
GM1035-Set |
Dive Rite 5.5´´ Tank Bands
- Beveled edges that minimize scratching of painted tanks
- Constructed of 18-gauge 304 stainless steel
- Stainless steel all-thread bolt kit
- Complete kit including 2 bands and 2 sets of hardware
- Made for 5.5" diameter cylinders
- FULL MANUFACTURER'S WARRANTY
| | $160.00
|
![See how it works](javascript:void(info("/images/tankacc/clamp.jpg"))){kind=link}
![Click here to see how it works](javascript:void(info("/images/tankacc/tankwrapwork.jpg"))){kind=link}