Open Box/Demo/Like New Gear Blowout

Limited to stock on hand / No rain checks / No back orders.
All items in this section are subject to prior sale.

Mares Mission 2 Gauge Console 414418 017065

Mfg Part #: 414418

Mares Mission 2 Gauge Console

Open Box/Demo/Like New/All Packaging Included
You Pay:
You Save:
  • Brand new & completely redesigned!
    Not like most other sites that sell the old discontinued model
  • Nitrox Compatible to 40% (The Recreational Limits of Nitrox)
  • Automatic maximum depth indicator
  • Visual low air indicator
  • Luminescent face is easy to read in dark or low visibility conditions
  • Easy to read luminescent dial
  • 4300PSI Pressure Gauge
  • DEPTH: 260 feet

Customer Reviews for Mares Mission 2 Gauge Console:

See the top 20 most helpful scuba gear reviews

No reviews found for this product.

Questions and Answers for Mares Mission 2 Gauge Console:

There are no questions yet.

414418 - Mission 2

The latest result of uncomplicated ingenuity

• Modular design
• Multiple attachment points
• Display for easiest readability

Instruments: submersible pressure gauge +
depth gauge.
Boot: shock-resistant elastomer.
Hose: 7/16” UNF length 90 cm.
Dimensions: 218 x 72 x 29 mm.
Weight: 410 g

Our analog console with pressure and depth gauges offers the simple yet versatile option to upgrade from the analog depth gauge to the compact Puck capsule computer.

The submersible pressure gauge is a safety device for monitoring residual air pressure
in the tank, designed to be used as part of a SCUBA set (open-circuit, self-contained
underwater breathing apparatus). The pressure gauge must be assembled on
the regulator first stage by means of the high pressure hose connected to the gauge.
The pressure gauge can be used at temperatures below 10°C.


1) Locate the high pressure ports on the regulator first stage (refer to the instruction
manual of the regulator; the high pressure ports on the first stage may be marked
with the letters “HP” or with the maximum pressure rating) and, following the
instructions, remove the plug from the chosen port.
2 ) Remove the thread protection cap before connecting the hose to the regulator first
3) Screw the hose fully into the high pressure port of the regulator first stage. Tighten
firmly but carefully, using a 14-mm hex

After use, it is recommended that you rinse the instrument in fresh water while it is still
assembled on the regulator, to prevent water from penetrating inside the hose.
Allow to dry in air, and then put the instrument away, taking care to replace the special thread
protection cap on the hose. The instrument should be stored in a dry place,
protected from heat sources and direct light, without bending the hose too tightly (minimum
bend radius 20 cm).

• Avoid exposing the instrument to direct sunlight or sources of heat.
• Treat the gauge like a precision instrument and avoid bumps or knocks.
• Rinse in fresh water after every dive. It is recommended that the 108 O-ring Vitron
gasket, located on the threads of hose coupling which connects to the pressure reducer, be
replaced periodically.
Any maintenance or repairs must obligatorily be performed by Mares or its authorized

Available for shipment only to the United States, Canada and Caribbean addresses

Choose Currency:, 1752 Langley Avenue, Irvine CA 92614

US and Canada 800.347.2822
International 001.949.221.9300