Aqua Lung 7mm Kids Tsunami Wetsuit 1000827 150932

Mfg Part #: 10008

Aqua Lung 7mm Kids Tsunami Wetsuit

You Pay:
You Save:
  • Adjustable Velcro collar - helps keep cold out
  • Skin-in neoprene seals at wrists and ankles--
    slides on easily, seals out water and retains greater warmth
  • Back zip with leash (pull cord)
  • Flexible molded rubber knee pads provide exceptional grip and durability
  • COLORS: Black with Blue accents
  • KIDS SIZES: XSmall through 3XLarge

Customer Reviews for Aqua Lung 7mm Kids Tsunami Wetsuit:

See the top 20 most helpful scuba gear reviews

Average Customer Review: based on 1 reviews.

Rating: Aqua Lung. 7mm Kids Tsunami Wetsuit Black/Blue 2XLarge
Reviewer: steve lin  -  View all my reviews
It his is definitely shtick and wa suit, able to withstand anything we have in SoCal during any season. Only thing is, the neoprene is not as soft and elastic as some of the higher quality surf wetsuits, like the psycho freak. But this is a dive suit, so it doesnt have to be as flexible and elastic as surf suits

Did this Review help?

34 out of 58 people found this review helpful.

Questions and Answers for Aqua Lung 7mm Kids Tsunami Wetsuit:

  • Mike:

    Looking for a full size 7mm wetsuit for my super small 4 year old (40 inches 40 lb). How well will the xs fit?

    Aaron  (Certified Scuba Instructor at

    Hi Mike, With kids wetsuits we'd recommend that you go just a little big on them. This is beacuse they grow so fast. With the information you gave us the Extra Small would be good for them.

  • Andew:

    Looking at the Aqua Lung 7MM kids Tsunami Wetsuit VS the Hendersen 7MM Juniors Wetsuit. I was trying to figure out which wetsuit will be the easiest to get on and off?

    Bill  (Certified Scuba Instructor at

    Both are great suits but the Aqualung is a better value.

  • Gricha:

    Hello. Im looking for a 7mm wetsuit for my daughter. She is 12 but she is super petite. ?Neck 11in ?Chest 27.5 in ?Waist 23.5 in ?Hips 29in ?Inseam 23.5in ?Height 4 ft 8in ?Do you guys have one that would fit her? Bob - She is 71 lbs.

    Chance  (Certified Scuba Instructor at

    Based on the measurements you give, she should fit the Medium size quite well in this suit.

  • John:

    Looking for a size for a 142 cm 78 lb boy 10 yrs old and a wetsuit for a 141 cm boy who weighs about 75 lbs could you tell me the size?

    Darrick  (Certified Scuba Instructor at

    Hello John, going by those measurement I would suggest a size large for him.

  • trudy:

    sizing for daughter super skinny 65 pounds about 5 ft, need wet suit dont know a size

    Darrick  (Certified Scuba Instructor at

    Hello Trudy, you would need to order the size large.

  • GS:

    I am trying to decide between Aqua Lung 7mm Kids Tsunami and Pinnacle 5mm Elastiprene Wetsuit. I would like something durable, relatively comfortable, but especially something for warmth. Thanks!

    Arthur  (Certified Scuba Instructor at

    Both are great suits. The 7mm will give you greater warmth but will restrict movement slightly more than the 5mm. So its going to be a balancing act on personal preference.

  • Brian:

    Hi there. Looking to take my daughter diving in BC Canada and are having troubles finding something for the colder water temperature. What sort of water temperature would this suit be suitable for? Thanks.

    Bob  (Certified Scuba Instructor at

    This is a cold water diving suit suitable for water temperatures down to the low 50''s and depending upon the tolerance of the user, the high 40''s.

  • Heino:

    Looking for a wetsuit for my 7 years old boy. We need for cold waters (7mm). His weighs 27 kilo and is 137 cm tall. Which size would fit him best?

    Darrick  (Certified Scuba Instructor at

    Hello Heino, when you are sizing a wetsuit or dive skin. The two most important measurements are going to be your chest/bust and waist. Height is a secondary measurement and weight is the last measurement you take into account

  • Michelle:

    Is a 7mm suit appropriate for swimming? We are traveling to Sicily in march with a 7 and 10 year old and would like to swim, but the water will be COLD. Am wondering if a 7mm would restrict their motion.

    Darrick  (Certified Scuba Instructor at

    Hello Michelle, yes for swimming this suit would restrict the swimming movement. I would suggest this suit: which will give them better motion while swimming and help still keep them warm.

  • Gricha:

    Hello. Im looking for a 7mm wetsuit for my daughter. She is 12 but she is super petite. ?Neck 11in ?Chest 27.5 in ?Waist 23.5 in ?Hips 29in ?Inseam 23.5in ?Height 4 ft 8in ?Do you guys have one that would fit her?

    Bob  (Certified Scuba Instructor at

    In this suit we''d need to know the weight in order to get as close as possible for sizing. For information on alternate products please contact our instructors at

  • Steve:

    The 7mm looks awesome. Can you get boots and glove in xsmall.

    Bob  (Certified Scuba Instructor at

    Yes gloves come in Xsmall and boots can come in kid sizes.

Made entirely of 7mm HS200 high stretch neoprene

#10 YKK heavy duty back zipper with stainless steel zipper slider

Custom Aqua Lung zipper leash

Molded grip tab on neck closure

Embossed kneepads

Glued and blind-stitched seams

Hang tag includes size chart & high stretch neoprene illustration

Care and Maintenance - Wetsuits

The following Care and Maintenance information is provided for products that do not have a specific owner's manual and is intended as a general guide for basic care and maintenance of your Scuba Equipment.

There are several different types of materials used in wetsuits to achieve specific functions. It is helpful to better understand each of these materials in order to properly care for them.

Neoprene - Neoprene is the base material that virtually all wetsuits are made of. Neoprene is a type of rubber foam and is typically laminated with other materials depending on the desired function of the material.
Standard Nylon - A standard nylon outer lining is very durable against normal wear and tear. Normal care must be taken to prevent snagging, abrasion, and cuts.
Skin material - 'skin' material may be used either inside our outside of your wetsuit and often around the wrists, ankles, and neck area. This material has a rubber like appearance either being smooth or textured, and is commonly referred to as 'skin-in' or 'skin-out'. 'Skin' neoprene material is typically used in areas where a water tight seal is desired or a benefit can be derived from it's water shedding properties. Some additional care is needed to prevent cutting, or abrasion of this material. Sharp fingernails may cut this material if care is not taken.
Thermo-skin - This material may be used inside of your wetsuit. Thermo-skin material has a silver-colored smooth skin type surface. This material has beneficial heat reflective properties and also provides a sealing surface similar to standard 'skin' materials. Some additional care is needed to prevent cutting, or abrasion of this material. Sharp fingernails may cut this material if care is not taken.
X-Flex or Iso-Flex Neoprene - X-Flex and Iso-Flex neoprene are special materials designed specifically to have a much higher rate of stretch than conventional materials. Due primarily to the looser nit needed to achieve this high degree of stretch; these materials may be more prone to snagging. Velcro may also cause some light snagging and pilling of the material. Some additional care is needed to prevent excessive abrasion or snagging.
Care before the Dive:

With any of the skin surfaces including Thermo-skin, care should be taken when donning the wetsuit to not snag the interior skin surfaces with a fingernail or toenail as this material can be cut. Avoid placing your wetsuit on or near any hot surfaces.
Care During the Dive:

The exterior surface of your wetsuit is designed to withstand the normal wear and tear you might encounter during a normal dive. Abrasion against sharp rocks or other sharp objects can cut or puncture the exterior nylon surface so reasonable care should be taken to avoid these situations. Small cuts or tears can be easily repaired with wetsuit glue. Ask your dive professional for assistance.
Care After the Dive:

When removing your wetsuit, first unzip all the zippers completely. Then remove one section at a time taking care to avoid puncturing any of skin surface panels with a fingernail.
Wetsuit Cleaning:

Salt water and especially chlorine can 'dry out' the neoprene material. When neoprene material 'dries out' it looses it's flexibility. To ensure the wetsuit material retains it's flexibility for a extended period of time, it is important to thoroughly soak and rinse the wetsuit.
Soak the wetsuit in a tub of warm fresh water (not over 120°F) for at least 15-20 minutes.
After soaking, thoroughly hose off the wetsuit with fresh water
Place the suit on a thick hanger with all the zippers open to ensure maximum air circulation and complete drying.
Wetsuit Storage:

Wetsuit material can develop a permanent crease if left folded for a extended period of time. It is best to store your wetsuit laying flat. If that is not possible, you can store your suit on a hanger. Use as thick a hanger as possible to better support the weight of the suit. The thicker the suit, the heavier, and therefore the thicker your hanger should be. There are several after-market hangers available designed specifically for this purpose.
Store in a cool, dry and protected place out of direct sunlight.
Do not store your wetsuit in garage if the garage is used to park a vehicle. The exhaust emissions from the vehicle can over time deteriorate the neoprene.
Wetsuit Zipper Care and Maintenance:

Zippers are designed to be pulled closed or open in a straight line. Try to avoid pulling on the zipper pulls at an excessive angle to their intended path of travel. It is best to ask your dive buddy for zipper assistance in either opening or closing the back-zipper of a one piece back-zipped jumpsuit.

Avoid any contact with oil, gasoline, aerosols, or chemical solvents.
Do not expose any part to aerosol spray, as some aerosol propellants attack or degrade rubber and plastic materials.
Do not use any type of alcohol, solvent or petroleum based substances to clean or lubricate any part.
Do not store your equipment near any oil, gasoline, chemicals, or solvents.

Available for shipment to U.S. zip codes only

View all Aqua Lung Kidz Gear

Choose Currency:, 1752 Langley Avenue, Irvine CA 92614