Average Customer Review: based on 2 reviews.Rating: Tusa TUL-1000 LED Dive Light
Can I use this light out of the water continuously?
Dive lights, even LED dive lights are typically not advised for use out of the water. The reasoning is that they are designed to send as much power as possible to the light heads or diodes. This creates extra heat, which is damaging to the light. It is factored in that this extra heat will be dissipated and countered by the surrounding water. Without the water, the lights tend to burn out much faster (sometimes in the case of HID or Halogen bulbs instantly).
TUL-1000 - TUSA Tul-1000 LED Dive Light
The TUL-1000 is a compact lightweight handheld primary that packs a punch. Incredibly versatile, the TUL-1000 offers a choice of flood or spot beams with angles of 60 and 12 degrees respectively. 3 power levels and a built-in rechargeable lithium-ion battery allow a run time of 70 minutes at maximum power and up to 240 minutes at 1/4 power.
The housing is factory sealed with a rugged anodized aluminum bezel requiring no service, depth-rated to 300ft/90m and standard with an anatomically designed pistol grip. The TUL-1000 is ready for your next adventure whether it's a local beach or the Andrea Doria.
> 1000 lumen Flood/520 lumen spot primary LED
> Compact lightweight design with pistol grip
> Beam Angle: Flood: 60 degrees, Spot: 12 degrees
> 3 Power Levels with LED Indicator: 100%, 50%, 25%
> SOS Emergency Mode
> Run Time: 100%: 60 mins, 50%: 120 mins, 25%: 240 mins
> Charging Time: 70 mins
> Depth Rating: 300ft/90m
> Accessories: Bag, Wrist Lanyard, Charger (included)
> Battery: Sealed 2 cell Li-Ion (lithium-ion) rechargeable
> Case Dimensions: 4' x 2.25'/101mm x 57mm (l x w)
> DOWNLOAD the TUL-1000 user manual at http://www.tusa.com/contentdocuments/manuals/TUL-1000.pdf
With light off, hold switch in “back” position for 4 seconds to engage SOS mode. To exit SOS mode, hold switch in
either direction for 2 seconds to turn off, or press the switch forward and release it to turn light on in normal mode.
To save battery, TUL-1000 enters a deep standby mode when turned off. It may take up to 8 seconds for the charge
indicator lights to turn on when the charger is plugged in. If the charge lights do not illuminate after 8 seconds, rapidly tap the
charger against the charge contacts a few times, and then plug it back in.