Average Customer Review: based on 6 reviews.Rating: It was worth waiting for.
Can this mask be fitted with Rx Lenses?
This mask would need custom optics. Visit our complete mask and optics line at: http://www.scuba.com/scuba-gear-53/Masks-Masks-w--Optical-Lenses.html
Hi Is this mask in stock and how soon could you ship it to Hawaii? Thanks, if I but it I would have to meet it there as we are leaving Monday, June 3 rd for Hawaii!
since purchase of pioneeroceanic mask and daily usein oceanfor three months they are still fogging as well as very unclear viewing..daily clean with toothpaste have tried washing liquid and Erina Dive Shop does not assist with answers. The initial film on glass was removed but still difficult to see through.I do not breathe through nose to cause fogging.any suggestions?could the glass be a bad batch at manufacture? HELP please...thanking you in advance.
There have been no reports from divers or the manufacturer of anything amiss with the glass lenses on the Oceanic Pioneer masks. Fogging is typically caused by the condensation that forms due to the changes in temperature in and around the mask. You mention it is not clear to see through. Is it possible that the residue from the mask being cleaned has not been completely removed? If all else fails, return the mask to our repair department and they will send it to Oceanic and have it evaluated to be replaced.
FOR THE PIONEERS OF TOMORROW.
Inspired by historical heroes of the Diving Industry, Oceanic is proud to introduce the brand new Pioneer Mask line. With over two years in the making, this tough yet timeless mask incorporates design elements of the past with new design technology. The Pioneer features a full metal frame, exclusive easy‐to‐use strap release buckle system, and super‐view peripheral lenses with Saint Gobain Diamant ultra‐clear tempered glass.
Ultra‐soft silicone skirt molded directly to a rigid inner frame for extremely low internal volume
Full metal aluminum frame provides added strength and durability
Low volume, dual lens design with unsurpassed viewing angle
Skirt Tube Mounted Buckles reduce pressure on face
Exclusive one‐touch buckle adjustment
3D strap design that snugly fits against the head's natural curvature for unprecedented grip and comfort
Saint Gobain Glass Diamant ultra‐clear tempered glass provides optimum vision and color quality
ype 2 Windows
Material Plastic, Carbon, Aluminium, Silicone
Blow-off valve No
Optical lenses No
Frame colour Black/Red, Black/Blue, Black/Yellow, Black-titan
Water is more dense than air, which makes objects look blurry. A mask provides an air spae in front of the eyes to eliminate distorted vision.
Prior to using the mask for the first time, thoroughly clean both sides of the lens with a nonabrasive liquid detergent, or toothpaste, to remove any residue, then rinse with fresh water.
To prevent fogging during use, rub a 'no fog' solution, or saliva, on the inner surface of the lense while it is still dry, then rinse with water.
Adjust the strap so that it holds the mask comfortably and firmly in position on your face without being too tight or restrictive.
Place the mask on your face and pull the strap over the top of your head.
To clear water that enters the mask, stand up or come to the surface and lift the bottom of the mask away from your face to allow the water to drain out. While underwater, tilt yourhead back and exhale gently into the mask while pressing the top portion with your fingers. Water will be forced out the bottom edge.
To eliminate mask squeeze caused by the higher pressures that are experienced when diving deeper than a few feet, exhale slowly into the mask through your nose as you dive deeper. To equalize pressure in your ears, pinch your nose closed with your thumb and finger and blow gently while holding your mouth closed.
Care and Maintenance
At the end of each day of use, rinse your mask thoroughly in fresh water and towel dry. Do not allow the clear silicone skirt or strap to come in contact with items that are black rubber. This will cause the clear silicone to become discolored. Avoid prolonged exposure to direct sunlight or excessive heat.
Ensure that the mask is completely dry before storing. Store in a cool, dry location.