Aqua Lung Atlantis Mask 507710 127198

Mfg Part #: 507710
  • For Medium to Large Faces (110 lbs+)
  • Low volume design
  • Classic one window design
  • Crystal silicone - The highest grade silicone available for a soft comfortable seal
  • COLOR: Black Frame with Black Silicone Skirt

Customer Reviews for Aqua Lung Atlantis Mask:

See the top 20 most helpful scuba gear reviews

Average Customer Review: based on 2 reviews.

Rating: Big nosed people
Reviewer: Steven C.
For people with larger noses this mask is perfect. I have not been able to find a mask that fits for ages. It has enough volume that your nose will not press on the glass. High quality seal doesnt leak at all. Great mask

Did this Review help?

16 out of 24 people found this review helpful.

Rating: Nice mask, but pinching the nose is a bit difficult...
Reviewer: Bruno Marcondes
It is a nice mask. Nice face seal, Aqualung quality ! It seems just a little hard to pinch the nose to compensate ears. I have to use the both hands to do that.

Did this Review help?

6 out of 11 people found this review helpful.

Questions and Answers for Aqua Lung Atlantis Mask:

  • Jordan:

    my dog decided it needed to eat some of the silicone skirt on my aqua lung atlantis ii mask. is there any way to order a replacment or will i need to buy a whol nother mask?

    Darrick  (Certified Scuba Instructor at

    Hello Jordan, you would need to order a new mask. The skirt is not a replaceable part for the mask.

  • Karen:

    I had major trauma to nose resulting in 8 surgeries. I swim laps for exercise-no scuba, snorkeling, diving... Only swimming. I need to use a mask since ALL goggles put too much pressure on or around nose. Will this seal under my nose above lip and not touch my nose? If not. Any other suggestions? Karen Smith

    Arthur  (Certified Scuba Instructor at

    Hello, all masks shouldn''''t touch your nose but just cover them. This mask would be exceptional in covering your nose.

The Pacifica and Atlantis Masks continue to be popular with recreational and military divers for the large single lens, which offers a wide field of view.

Classic, large volume oval-styling mask

Excellent field of vision

Tempered glass lens

Mask Care and Maintenance
Care Before the Dive:

During the manufacturing process, a thin film of silicone will develop on the glass lens. This film of silicone will cause rapid fogging that is resistant to conventional anti-fog measures. It is important to remove this film of silicone from the lens prior to your first dive. To remove the film you will need to scrub the lens inside and out with a mild abrasive. A paste toothpaste is ideal but a liquid scrub will also work. Rub the cleanser into the lens with your fingers several times and then rinse clean thoroughly.
Mask fogging is a normal occurrence, even after the film of silicone has been removed. Normal fogging can be easily prevented with after market anti-fog agents or saliva. Rub onto the lens and then rinse. Your dive will now be fog free!
Some after after-market anti-fog agents contain formaldehyde, alcohol, or other substances that may damage the plastic materials used in your mask. If unsure, avoid prolonged exposure of the anti-fog agent with the plastic parts of your mask.
Care During the Dive:

When entering the water either from a boat or a beach, place a hand over the lens of your dive mask and hold it securely in place. This will help ensure your mask stays in place during entry and will help deflect any direct impact of water on the lens caused by the jump into the water or any approaching waves.
A typical dive staging area is a dangerous place for dive masks. Care should be taken to not leave your mask in a location where it might be exposed to dropping weight belts or tanks.
It is best to avoid putting your mask on your forehead at any time during the dive. Several factors can cause the mask on your forehead to be dislodged and subsequently lost. If you want to temporarily remove the mask from your face, place the mask around your neck.
Care After the Dive:

Soak in warm fresh water (not over 120°F) to dissolve salt crystals.
Rinse thoroughly with fresh water and towel dry before final storage.

Store in a cool, dry and protected place out of direct sunlight.
Store separated from other dive gear as the black pigmentation of other equipment may discolor the clear silicone skirt of your mask.

Avoid any contact with alcohol, oil, gasoline, aerosols, or chemical solvents.
Do not expose any part to aerosol spray, as some aerosol propellants attack or degrade rubber and plastic materials.
Do not use any type of alcohol, solvent or petroleum based substances to clean or lubricate any part.
Do not store your equipment near any oil, gasoline, chemicals, or solvents.

Available for shipment to U.S. zip codes only

View all Aqua Lung Masks

Choose Currency:, 1752 Langley Avenue, Irvine CA 92614

Click to Call
US and Canada
949.221.9300 / Toll Free 1.800.347.2822
International 001.949.221.9300