There are no questions yet.
M-110 - TUSA Visio Uno Mask
The M-110's single window design offers great visibility, reduced internal volume and enhanced comfort while incorporating several TUSA patented mask technologies such as a 3-D strap, Round-Edge skirt and a skirt mounted Quick-Adjust Buckle System.
Additionally, the M-110 design is available in a special edition enhanced with optical glass, AR/UV coating and a chrome frame, the M-110SQB-CR Visio Pro.
> Low profile, single window teardrop design
> Enhanced field-of-view over 2-window masks
> Skirt mounted Quick-Adjust Buckle System
> Round-edge skirt for maximum fit and comfort
> 3-D strap for ideal anatomical fit
> Colors: Black (BK, shown), Cobalt Blue (CBL), Translucent (T)
> Available in black silicone (M-110QB): Black (BK), Metallic Blue (MBL), Metallic Red (MDR), Metallic Silver (MS)
Skirt Mounted Quick-Adjust Buckle System
The Quick-Adjust Buckle System incorporates a newly-designed low-profile buckle into the crystal silicone skirt of the mask. The result is a compact, lightweight, technologically advanced mask design that can be easily and quickly adjusted for a perfect fit.
Round Edge Skirt
TUSA's Round Edge Skirt features a proprietary round edge cross-sectionally shaped skirt. This rounded edge results in a soft fit that suppresses pressure and reduces creasing left on the face. The 'planar fit, instead of linear fit' silicone skirt maintains great fit and unprecedented comfort.
TUSA's patented 3-D strap is a true three-dimensional design that snugly fits against the head's natural curvature. The 3-D strap offers unprecedented comfort and fit unlike standard flat mask straps.
Mask, Snorkel and Fin Care
Q: Should I clean my new mask?
During the production process silicone film can form on the glass lenses which can cause increased fogging. A toothpaste or a very mild abrasive liquid can be used to gently scrub the inside of the lens to remove this silicone layer. This will help to reduce excessive fogging on a new mask.
Q: What causes my mask to fog, is something wrong?
As mentioned above when new it is typically the silicone film from production. However, over time oils and contaminants can build up on the lenses causing a layer on top of the lens that will increase fogging. We recommend cleaning the mask occasionally with a mild liquid soap or detergent to remove this build up. This can help to reduce fogging that may occur with a dirty lens.
Q: How do I stop my mask from fogging?
Aftermarket anti-fog solutions are available and can be used on TUSA masks. Companies such as JAWS, McNett, and 500psi amongst others offer suitable products. Please contact your local TUSA retailer for their recommendation.
Q: I have CrystalView AR/UV lenses in my mask, any additional care required?
Masks such as the M-211 Freedom One PRO and M-28S Geminus PRO are equipped with CrystalView AR/UV lenses. These optical glass lenses are treated with a multi-layer proprietary anti-reflective and ultraviolet coating that is hardened for durability. Although not likely, care should be taken when using these lenses as the coating could possibly be scratched or removed. The coating is on the outside of the mask lens, which allows cleaning and use of an anti-fog solution on the inside without issue. Take care to read the included care and maintenance information with each CrystalView AR/UV equipped mask.
Q: How should I care for my mask, snorkel and fins?
After use rinse your equipment in fresh clean water and dry thoroughly before storing. Take care that any purge valves or snorkel tops are free from sand and debris that can cause leakage. Store in a cool dry place away from heat and sun. Do not dry your equipment in direct UV light for extended periods of time.
Q: Can I get parts for my Mask, Fins or Snorkel?
TUSA offers a variety of straps, buckles and accessories for replacement if a part is broken or damaged. These are available as TUSA CARE genuine accessories and must be purchased from your authorized retailer.
No Instructor Reviews Found For This Product