Oceanic Excursion 2 BCD .. 08.7132.52 006607

Mfg Part #: 08.7132
Retail:
 $589.95 
You Pay:
$569.95
You Save:
$20.00
4 Questions
4 Answers
  • Brand new & completely redesigned
    Not like most other sites that sell the old discontinued model
  • 20% lighter than the orginal Excursion BC
  • QLR3 Integrated Weight System - 30 lb capacity (20 lbs Diver releasable - 10 lbs non-diver releasable trim weights for improved weight distribution and balance)
  • 1600 Denier
  • Adjustable Sternum strap
  • Reflective accents for visibility
  • Rear bladder design offers exceptional comfort and superior buoyancy control underwater
  • Neoprene neckroll for added comfort
  • 10 stainless steel D-rings allow you to securely customize the equipment you need during your dive
  • Reinforced harness with contoured shoulders offers durability with comfort
  • Two zippered utility pockets
  • Integrated instrument retractor mount 
  • Knife mounting grommets on left and right side (knife not included - see below to order)
  • COLOR: Black
  • SIZE/LIFT:  Small/50, Medium/50, Large/50, XLarge/58
  • FULL MANUFACTURER'S WARRANTY

Customer Reviews for Oceanic Excursion 2 BCD ..:

See the top 20 most helpful scuba gear reviews

Average Customer Review: based on 2 reviews.

Rating: Easy setup.
Reviewer: Waymon Brewster  -  View all my reviews
It was nice not to have a weight belt. Very comfortable with no chaffing under the arms. Being a back inflator, it will push your face down in the water, when on the surface.

Did this Review help?
No
Yes

82 out of 167 people found this review helpful.

Rating: great bc
Reviewer: jon moss  -  View all my reviews
The bc is designed very well, the weight pockets work great, love the lumbar pad.

Did this Review help?
No
Yes

102 out of 197 people found this review helpful.

Questions and Answers for Oceanic Excursion 2 BCD ..:


  • Anthony:

    could you explain how the spinner knife is mounted to the bc thanks Tony

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Anthony, if you enlarge the picture you will see two holes above the Oceanic logo. That is where you will attach the BC knife to the BCD. There is also a set of holes on the other side of the BCD in the same location.

  • Linda:

    we have older bcsa probe and isla. we have atomic seconds installed. we they fit this bc without modification? the dealer put these original bcs together which is why i am asking.

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Linda, the Atomic SS1 will fit your new BCD''s the corrugated hose are the same. You would just need to have your local dive shop install them for you onto your new BCD''s.

  • Marc:

    Can I use my scubapro air 2 with this BCD.

    Bob  (Certified Scuba Instructor at Scuba.com):

    No. Oceanic uses a different size corrugated hose that is not designed to adapt to the Air 2.

  • Linda:

    Follow up question, the SS1s just screw on our current BCs, would the new one need to be modified to accept the SS1s since you mentioned needing a dive shop. If so would you be able to do the modification.

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Linda, yes the piece that is attached to the BCD and then you screw on the SS1. That part would need to be taken off and installed into the new BCD.

Patented BioFlex® rear inflation bladder provides up to 23 ltr. lift (17ltr. S, M and L) with minimum drag when deflated
Streamlined harness with Reinforced contoured shoulders, padded back pack with lumbar support and adjustable position sternum strap
New QLR3 Integrated Weight System and trim pockets
Generous zippered utility pockets
Pre-bent welded stainless steel d-rings
Integrated instrument retractor mount (retractor not included) and Spinner Knife mounting grommets on either the left or right
Patented adjustable depth compensating cummerbund
20% weight reduction (4.2 kg size Large)

Type Wing
Material Fadeless 1600D Nylon - Air Cell Material:Patented BioFlex® rear inflation bladder with minimum drag
Construction Single Bladder
Inflatorsystem Reliant Inflator
Backpack Streamlined harness with reinforced contoured shoulders,Padded backpack
Size SM, MD, LG, XL
Bungees Yes
Buoyancy SM 17ltr, MD 17ltr, LG 23ltr, XL 23ltr, XXL 23ltr
Total weight Size LG 4,20 kg
Exhaust valve Right back pull-ball exhaust, additional an integrated rope pull exhaust
Belt Molded tank cradle with anti-slip pad
Cummerbund Patented adjustable Depth Compensating Cummerbund
D-rings Pre-bent welded stainless steel d-rings
Weight pockets QLR 3 Weightsystem, max 12 kg, Trimm pockets, max 5 kg

Not available for shipment to Australia

View all Oceanic Buoyancy Compensators

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614

US and Canada 800.347.2822
International 001.949.221.9300