Zeagle Ranger Jr. BC 7905RK 005610

Mfg Part #: 7905RK
 $349.95 
3 Questions
3 Answers
  • A full featured BC, but adapted for smaller bodies
  • Can expand as the young diver grows
  • Integrated Ripcord Weight System - 16 LB capacity (Diver releasable)
  • 1050 Denier Material
  • Adjustable Cummerbund
  • Four stainless steel D-rings (two adjustable)
  • Adjustable Sternum Strap
  • 24lb Lift
  • SIZE: Waist 22"-28"
  • FULL MANUFACTURER'S WARRANTY

Customer Reviews for Zeagle Ranger Jr. BC:

See the top 20 most helpful scuba gear reviews

No reviews found for this product.

Questions and Answers for Zeagle Ranger Jr. BC:


  • Brandon:

    would my son need this

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Brandon, if you son is scuba diving then yes he would need this type of equipment to do that. When you are sizing a BCD the two most important are your height, and waist. Chest and weight are secondary measurements.

  • Kathleen:

    What is the height and weight range (min and max) the Zeagle Ranger Jr BC will accommodate?

    Bob  (Certified Scuba Instructor at Scuba.com):

    When sizing a bcd the most important measurement will be the waist size. It needs to fit the torso properly in order to remain snug and not shift about during the dive. Weight, with a back inflated bcd is rarely an issue as the lift capacity in most bcd''''s is more than enough. In this case, Zeagle doesn''''t even offer weight or height ranges for the bcd.

  • Kathleen:

    Thanks Bob, should I contact Zeagle directly to find the maximum waist size, wondering if it fits up to adult XS-small-medium, etc?

    Bob  (Certified Scuba Instructor at Scuba.com):

    The waist sizes it will fit are 22" to 28".

Ranger Junior
The BC that can grow with your child

The Ranger Jr gives parents the choice of a quality BC made specifically for children. Using the same rugged contruction as the legendary Ranger BC, the Ranger Jr utilizes our Personal Fit System to let you change out specific sections of the BC so it can grow right along with your child. The waist panel of the Ranger Jr can be adjusted out to add several inches of growth room in the waist area. The shoulder section of the BC can be replaced with larger sections when the child starts inching up past the 'knee high to a grasshopper' stage. These features combined with the same quality in material and construction means that the Ranger Jr will last for many years saving you from having to buy a new BC after every growth spurt.

24lb lift capacity ballistic bladder
16lb capacity Ripcord weight system
PFS system allows for changing out sections of the BC for a growing child
Heavily reinforced 1050 denier ballistic nylon construction in the vest, just like the Ranger BC
Adjustable elastic waist panels
2 stainless steel angled D-rings on shoulders
2 stainless steel D-rings on vest
Adjustable sternum strap

Are Zeagle BC’s worn differently?
Yes. Because of the uniqueness of the design, the Zeagle System will fit quite differently from a conventional BC. The waistband will be lower, well below the diaphragm (so it won’t restrict your breathing), the front of the BC is open, reducing restrictions further, and the buoyancy is low down on the back and sides, where it can expand outward without compressing your chest. The result is greater comfort and a more balanced attitude in the water.

Why do you put the weights in the BC?
Including the weights as part of the buoyancy system improves balance and comfort in the water- it keeps your body from being pulled in different directions by the opposing forces of lift and weights. All Zeagle BC’s since 1982 have been designed to be weight integrated.

How do you drop the weights in an emergency?
Zeagle’s patented Ripcord system allows for a single point instantaneous release of the weights from almost any position in the water. When compared to a weightbelt release or the two handed systems used on many other weight integrated BC's the Ripcord is far simpler and more reliable. Some BC's offer a more economical pull out system that requires a two sided release to drop all the weights.

Isn’t it too heavy to lift?
In most circumstances we recommend that the diver put on their BC first, then place the weights in the weight pockets. This avoids having to lift the entire scuba system and weights together.

What’s the Personal Fit System?
People come in more than five sizes- the Personal Fit System is a system of interchangeable components that allows your Zeagle dealer to custom fit a buoyancy system to your body and your style of diving. In addition to fitting waist size, chest size, and torso length independently, we can adjust the style of various components and the amount of lift in the buoyancy system to match the type of diving you do.

Do you make BC's for women?
Zeagle’s Personal Fit System was designed with women in mind. It’s very common for women to fit a size smaller in the shoulder section of a Zeagle BC than they fit in the waist size- a medium waist with small shoulders, for example. On our heavy duty BC's we offer narrower women's shoulder sections with smaller buckles that will fit women's upper bodies better. Of course the advantages of weight integration and doing away with the weightbelt are often even greater for women than for men. The greatest difficulty in properly sizing a woman's Buoyancy System is not finding a smaller size, or allowing for the bust, but lies in the fact that women's bodies have a defined waist where a waistband must fasten in order to secure the BC. At the same time, women tend to have both a shorter torso length and a lower center of buoyancy compared to men. So conventional buoyancy systems,which would ideally be worn lower for best balance and comfort, must be worn higher, around the narrowest part of the waist, in order to be secure. Zeagle has two BC models specifically designed with these considerations in mind; - The Zena is an extremely light and comfortable BC, ideally suited for warmer water diving. It is designed and constructed to be worn over a bathing suit or light warm water suit. The Zena's twin waist and hip band system provides a way for women to securely position the weights and buoyancy below waist level, around the body's center of buoyancy. - The LaZer is a heavier-duty BC with the same ideal fit for a woman's body shape. It is still considered to be a travel BC and can be worn over a bathing suit, but it is also made to be worn over a wetsuit or drysuit that might be needed in local diving conditions. It has all the features of the very popular Stiletto BC, but with a vest that is scooped at the rear to comfortably accommodate a shorter torso and wider hips than a Stiletto.

Will it float you face down?
Zeagle BCs are designed to fit low on the body so the lift is positioned near the body’s center of buoyancy. This results in a very neutral surface flotation, leaving the diver free to assume any position in the water. Many non-Zeagle rear flotation BC’s fit high on the chest, the same way most nonintegrated jacket style BC’s fit. In addition to being less comfortable, this volume of lift high on the back can cause the diver to be rotated forward when attempting to stay upright on the surface.

Can I wear a weightbelt with a Zeagle?
It isn’t necessary, and it adds bulk and weight.

Which BC is best for me?
Zeagle makes buoyancy systems for everyone– from the occasional vacation diver to the most professional Search and Recovery divers. Your dealer can help you select a system and appropriate accessories based on you size, experience, diving environment, the kind of diving you do, and the kind of diving you want to do in the future.

What about construction and warranty?
All Zeagle Buoyancy Systems are hand sewn from the best available materials and heavily reinforced at all stress points. Our style of construction is labor intensive and expensive, but it results in a more durable, better fitting BC. Individual components of the system are replaceable or repairable if damaged. This quality of construction makes it possible for us to offer a limited lifetime warranty to the original purchaser. If a defect appears or the system fails at any time while you own it, Zeagle will repair or replace the system free of charge.

Where can I get user's guides for Zeagle Products?
Downloadable versions of product owner's manuals are in PDF format, which is a file format that can be viewed and printed from virtually any computer platform.

BCs-

LIMITED LIFETIME GUARANTEE TO THE ORIGINAL OWNER, OFFERED THROUGH MANUFACTURER

Your BC is guaranteed against defects in materials and workmanship. This guarantee does not cover damages from accident, abuse, neglect, alterations, improper usage, normal wear & tear or failure to provide reasonable care. To validate your warranty you must fill out and return your warranty registration by regular mail or e-mail, within 30 days of purchase. All warranty claims will be handled through Zeagle, or an authorized Zeagle Dealer.

here is the serial number on my BC?
In 2009 we began serializing the bladder assembly of our BCs. To find the serial number look at the left side (your right if you were wearing the BC) in between the vest and bladder. Roughly where the top tank band is inserted into the vest you should see a 1.5' long white tag with the serial number stamped onto it. If you do not see this tag you can select 'My product does not have a serial number' when registering your BC.

How can I set my BC up for Twin Cylinders?
All Zeagle Heavy-Duty Ballistic BCs (Ranger, Ranger LTD, Tech, 911, SAR) as well as backplate systems, can be used with twin tanks. The easiest method is to use the Twin Cylinder Mounting Plates.

View all Zeagle Buoyancy Compensators

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614

US and Canada 800.347.2822
International 001.949.221.9300