Princeton Tec Corona 8 L.E.D. Bike Light CBK-BK 026813

Mfg Part #: CBK
 $59.99 
  • Free 8 AA Alkaline Batteries included
  • Free Handle Bar Mount included
  • Free Helmet Mount included
  • Ultra bright bike light
  • Be seen at night
  • State of the art ultra bright L.E.D. (Light Emitting Diode Technology)
  • White L.E.D. light travels farther underwater for maximum visibility and truer colors
  • Shock and impact resistant L.E.D. bulb - will not break when dropped
  • 4 light settings - switch between 8, 5, 3, or 1 L.E.D. bulb
  • Lightweight
  • LAMP: 8 Ultrabright L.E.D. Bulbs
  • POWER: 90 Lumens
  • COLORS: Black or Green
  • Made for out of water use only - not designed for in water use
  • FULL MANUFACTURER’S WARRANTY

Customer Reviews for Princeton Tec Corona 8 L.E.D. Bike Light:

See the top 20 most helpful scuba gear reviews

No reviews found for this product.

Questions and Answers for Princeton Tec Corona 8 L.E.D. Bike Light:


There are no questions yet.

CORONA BIKE

The Corona Bike is a commuter’s dream and perfect for lighting up the trail. With the ability to switch between 8-, 5-, 3-, or 1-LED output, the Corona Bike allows you to choose the amount and type of light to satisfy every task. The varying levels of output and number of LEDs chosen create a wide variety of burn times, beam patterns and energy consumed.

Includes helmet and handle bar attachments.

SPECIFICATIONS
POWER 90 Lumens
LAMP 8 5MM Ultrabright LEDs
BURN TIME 160 Hours
BATTERIES 8 AA Alkaline or Lithium
WEIGHT 250 Grams

8 ULTRABRIGHT LEDS
The highest quality LED available, the Ultrabright LED is bright and efficient. The smooth, white, wide-beam light emitted by Ultrabright LEDs is ideal for close to mid-range tasks. Ultrabright LEDs are usually grouped together to offer a more powerful light source. Advances currently underway will continue to improve the effi ciency and brightness of Ultrabright LEDs.

8-AA
8 AA Alkaline

HEATSINK TECHNOLOGY
Princeton Tec has developed proprietary ultralight heatsinks to protect LED products from overheating. Even though LEDs operate at much lower temperatures than traditional incandescent bulbs, they still generate heat. If this heat is not dissipated, the LED will suffer irreversible damage. By using heatsinks, Princeton Tec lights can burn at extreme brightness levels for long periods of time. The heatsink may be incorporated internally or externally depending on the product and its application.

LUMEN 90
The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.

MULTIPLE BEAMS
This beam pattern combines focused narrow and focused wide beams to allow for the most versatility. At close range, the focused wide beams simulate normal daylight conditions so you can take advantage of your peripheral vision. The focused narrow beams create a long-throw spotlight ideal for night hiking and search and rescue.

REGULATED LED / CONSTANT BRIGHTNESS
Princeton Tec lights that feature regulated LEDs have a sophisticated regulating circuit that maintains initial brightness as long as the batteries have sufficient voltage. Traditional lights are very bright initially, but immediately begin to dim and continue to dim until the batteries are drained. Constant Brightness is a term used to describe products that have regulated LEDs.

UL CERTIFICATION
Underwriters Laboratories Inc. (UL) is an independent, not-for-profit product-safety testing and certification organization. They have been testing products for public safety for more than a century. In order for a product to bear the certified UL Mark, it must pass all UL requirements at their testing facility. Princeton Tec lights that are UL certified fall into one of the following classifications: Class I – Division II – Groups A, B, C, & D or Class II - Division II – Groups F, & G. Refer to the comparison chart in the rear of the catalog. Class I – Division II – Groups A,B,C,& D will be noted with one (+) Class II – Division II – approved for Groups F, & G, will be noted with two (++).

WATERPROOF - LEVEL 1
Level 1 is assigned to lights that offer a degree of water protection equivalent to IPX4 in the International Electrotechnical Commission (IEC) standards. Lights rated at Level 1 are designed for water resistance to splashing and quick dunkings. If a light with a Level 1 rating is accidentally submerged for a longer period of time, the batteries should be removed and the cabinets should be carefully inspected for signs of battery leakage. If water has entered the housing, the light should be dried and batteries replaced.

WEIGHT - 382
Princeton Tec’s advertised product weights always include batteries. For many products, battery weight is a large percentage of overall weight. Weight can be significantly reduced by using lithium batteries in lithium-compatible products.

View all Princeton Tec Lights

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614

US and Canada 800.347.2822
International 001.949.221.9300