Mares Cyrano 700 Rigged Speargun .. Review - $341.95 - Scuba Gear Customer Reviews
had an older mares and used it until it just wore out. looking forward to using this one just as long.
Did this Review help?
1 out of
people found this review helpful.
mares cyrano 700 spear gun
love it!!!! peace out.
Did this Review help?
2 out of
people found this review helpful.
Questions and Answers for
Mares Cyrano 700 Rigged Speargun ..:
just got my Cyrano 700 and wondering how to connect the cable that came with it to the front of the gun. I assume that you use a combination of string and cable. Also, If you wrap the cable around the front and rear line holders, wont the cable kink?
(Certified Scuba Instructor at Scuba.com)
Hello Greg, no the shock cord will not kink when the gun fires at your target. Also you would need to run the cable from the top of the gun to the trigger release system.
413109 - Cyrano
The Cyrano speargun combines the power characteristics of a pneumatic gun with manageability and extreme shaft speed. Highly sensitive release mechanism. Ergonomic handle with a soft insert. The 85, 97 and 110-cm sizes are fitted with a 7-mm tahitian Race shaft. The other lengths are fitted with a 7-mm shaft with a threaded tip. Special bag included. Available in 55, 70, 85, 97 and 110-cm sizes, all with power adjusting system (WP).
All with power adjusting system
11mm internal barrel: This Mares patent has revolutionized the way the world sees underwater pneumatic spearguns.
The decision to use the internal barrel, where the piston slides, with a reduced 11mm diameter, makes the weapon very easy to load, propels the shaft at high speeds and provides superior power and accuracy.
Superior accuracy: Special innovative technical solutions give these spearguns an accuracy that further exceeds all other products on the market. Ongoing comparison tests and the leading Mares technologies available helped achieve this result, along with valuable contributions from our engineers and top athletes.
FEATURES OF THE CYRANO GUNS - Positive buoyancy when the shaft is removed. Except CYRANO 550. - Anatomic handle in combined stiff-soft material. - Power regulating system. - Side line release (patented). - Fluorescent viewfinder. - Fast-hook shaft holder. - Hydrodynamic cross-tied line hole. - New safety bar (patented). - Technopolymer shock-absorbing piston and bushing - Anatomic loader in the handle (patented). - Head with large drain ports. - Positive buoyancy when the shaft is removed. - Harmonic steel ø 7 mm shaft (also available in the Tahiti model).
GENERAL WORKING PRINCIPLE
All Mares CYRANO Pneumatic Spearguns are supplied from the factory with compressed air. The air originally introduced into the speargun is recaptured with every shot and not dispersed when the shaft is released. The amount of compressed air the spear gun contains depends upon the amount of air pumped into it
The air contained in the tank is introduced through the inlet valve) with the use of an appropriate pump. When the shaft is loaded, the piston is moved down the barrel , thus further increasing the air pressure, until it engages the catch hook. When the trigger is pulled, the piston is released by the catch hook. The expanding compressed air propels the piston the length of the barrel, thus propelling the shaft. The piston is stopped at the barrel head , ready for reloading. Mares has taken its pneumatic spear gun performance another step with the CYRANO Line. Years of research and testing jointly with the Institute of Mechanical Technology of the University of Genoa, Italy, have led to the exceptional performance of the CYRANO spear gun. The internal diameters and compression ratios were optimized so that the CYRANO spear guns now outperform traditional spear gun efficiency by more than 15% (Mares patent).
1) Important: do not start by loading the shaft. 2) SHOCK LINE - The shock line is packaged independently, unassembled along with the elastic expansion ring. Assemble as follows: a) Tie one end of the shock line to the line retainer on the shaft . b) Slide the shaft into the muzzle of the gun until it touches the piston. Important: do not load gun now. c) Wind the shock line at least twice, from the line release on the handle to the line holder on the nose cone. d) Approximately 12 inches from the line holder on the nose cone, tie the elastic expansion ring to the shock line leaving approximately 4 inches of slack line in the center of the ring . e) Thread the remaining end of the shock line through the line holder on the nose cone. Pull on the loose end of the shock line until the elastic expansion ring has expanded approximately ¾ of an inch. Tie the shock line to the nose cone maintaining this tension . f) Attach your spear tip by screwing it on (except Tahitian shafts).
Never load, unload or fire your speargun out of water. Know the total distance your shaft can be propelled underwater. Never shoot the speargun where you cannot see, or in the direction of other people or stationary objects. Violation of these warnings could cause the speargun to wound you or someone else causing severe injury or death. 1) Check the shaft and line retainer to be assured they are working properly before loading. 2) Make sure your spear tip is tightened securely. 3) Before entering the water, wrap the shock line around the line release at the handle then around the line holder at the nose cone until slack is used up. Secure the shaft by placing the rear of the shaft in the hole in the trigger guard, then snap the front end of the shaft into the shaft holder on the nose cone
4) Move the safety bar to the 'safe' position prior to loading, by rotating it downward towards the trigger. Only when you are ready to shoot should the safety bar be moved to the 'fire' position, by rotating it upward away from the trigger. The CYRANO speargun features a patented safety bar system which, when in the 'safe' mode, mechanically blocks the trigger and prevents finger access to it. Be sure to check the operation of the safety bar periodically. With the speargun unloaded, move the safety bar to the 'safe' position. In this mode the trigger should not be able to be depressed. the trigger should only be able to be depressed when the safety bar is moved to the 'fire' position. Do not load or use the gun if any sign of malfunction exists (Fig. 3). 5) In surf entries, load the speargun only once you are beyond all turbulence. In boat entries, load the speargun only once you are out of all turbulence and away from all divers and the boat. 6) Loading. Remove the loader from the handle. Support the handle of the gun against your thigh or foot, depending on the length of the gun . Grasp the gun by the nose cone (see Fig. 6) and insert the shaft into the gun, being sure that the shaft is centered in the muzzle. Avoid inserting the shaft at an angle which may cause internal damage to the gun. Place the loader over the spear tip and push the spear straight down the barrel of the gun until it latches. If your spear shaft becomes bent replace it. Do not attempt to force it into your gun as this can lead to internal damage.
7) After the gun has been loaded, the shock line should immediately be wrapped. Take the shock line at the shaft end and wrap it around the line release at the handle then around the line retainer on the nose cane until all line is used. The elastic expansion should be one the last wrap and will provide the necessary tension to keep the shock line in place
UNLOADING 1) While still under water, visually check the area thoroughly and when you are sure no one is in firing range, place the safety bar in the 'fire' position and with the barrel parallel to the surface above, discharge the gun by depressing the trigger. POST DIVE CARE AND MAINTENANCE Your Mares CYRANO Pneumatic Speargun is an exceptionally powerful and accurate speargun. By following the recommended care and maintenance procedures it will provide you with many years of trouble-free use. 1) Thoroughly rinse your CYRANO speargun and shaft, especially around the muzzle and power adjustment lever after each use with fresh water. 2) Check your loader for wear, replace if necessary. 3) If your shaft becomes bent replace it. Do not attempt to force it into your gun, this can damage the gun internally. 4) Your CYRANO speargun should be stored in a dark cool place. Do not expose your speargun to heat or direct sunlight. 5) Make sure the power adjustment lever is in the maximum power position when storing it.
6) ALL PNEUMATIC SPEARGUNS SHOULD BE STORED IN A MUZZLE DOWN, HANDLE UP POSITION. This allows oil in the barrel to keep the piston lubricated while not use. Small amounts of oil deposits can be expected to appear at the muzzle end.