Rating: awsome product ! shipping sucked !!
Reviewer: Lenard Poole,
reveiw of my viking dry suit its the best suit I ever dove in 24 years of pleasure and Light commercial work.....
so dry and warm !! has off to viking for a great suit!
len poole lenpoole marine services
Did this Review help?
201 out of 445 people found this review helpful.
Questions and Answers for Viking Xtreme Drysuit:
Is it possible to order this suit with front entry and ring cuffs added to it and if so can it be shipped to Canada and what would the total cost be?
Darrick (Certified Scuba Instructor at Scuba.com)
The Viking XTREME is manufactured from a lightweight polyurethane material, with PU reinforced knee pads fitted for additional protection. This material is easy to clean should it become contaminated. Seams are high frequency welded for ultimate strength and security. The XTREME is an ideal drysuit for sports / wreck diving and technical diving.
Strong lightweight material High frequency welded seams for security Easy clean smooth exterior Reinforced knees Front or rear entry models available
Embossed single coated knitted fabric, with polyether polyurethane. Material weight approx. 474 g/m2.
Black / Black
Externally high frequency welding for security. Internal seams heat taped to hide the seam.
PU embossed knee pads are welded above and below the knees for additional protection. STANDARDS EN 14225-2:2005
ZIPPER Rear entry suits: PU Medium Duty zipper (85 cm length) welded into suit Front entry suits: PU Medium Duty zipper (90 cm length) welded into suit Zip flap fitted as standard to front entry suits VALVES Standard configuration includes the following valves mounted on rubber backing discs: Central chest: Viking Push protected inlet valve Hose: CEJN fitting, 80 cm long Upper left arm: Viking low profile exhaust valve BOOTS Rubber coated 5 mm neoprene boots with a fin retainer are fitted as standard. NECKSEAL The Viking XTREME is fitted with a Surveyor latex neck seal as standard. Alternative options: Bellows latex neck seal, neoprene neck seal, quick connect collar system which allows for quick changing of broken seals. HOOD OPTIONS Viking XTREME suits may be fitted with a wide range of hood options as follows: Surveyor latex hood + thermal inner hood, Nautic neoprene hood with smooth face seal, Smoothskin hood. If the suit has been fitted with a Quick Connect collar system, then specific latex and neoprene hoods are available for fitting. CUFFS Latex conical cuffs are standard. Cuff options: PRO latex cuffs or bellows latex cuffs. Glove ring options: In order to make the suit completely waterproof, it is possible to fit a rubber cuff ring system with fixed external rubber ring, and loose stiff plastic ring which holds the latex seal in place. The alternative is a plastic bayonet glove ring system with a plastic ring mounted on the sleeve, and a replaceable cuff held in place with a plastic ring. Both systems then make the fitment of Latex gloves possible. INCLUDED WITH EACH DELIVERY Each suit comes supplied as standard with the following items: Suspenders, carry bag, user manual, repair kit and zip care materials.