BUY THIS...

Viking Xtreme Drysuit 20050001-0W 066455

GET THIS FREE


Video: Viking Extreme Scuba Diving Drysuit
Mfg Part #: 20050301

Viking Xtreme Drysuit

Options: 
 $1,795.00 
  • FREE Viking duffle bag included 
  • FREE Viking drysuit repair kit included
  • FREE Viking drysuit inlet hose included
  • FREE Suspenders included
  • Great value for the recreational diver
  • Lightweight Shell Suit. Allows for diving in any conditions by changing thermal under garment
  • Flexible polymer-coated stretch fabric with smooth surface allows easy cleaning and repair
  • Extremely abrasion resistant material resists punctures and tears
  • Easy shoulder entry - dry zipper across the back of the shoulders with leash (pull cord)
  • Internally reinforced fused rubber seams
  • Latex neck and wrist seals
  • Under garment sold separately
  • COLOR: Black or Black with Blue accents
  • SIZE: XSmall through XLarge
  • Attached latex hood included
  • FULL MANUFACTURER’S WARRANTY

VIKING recommends their undergarments click here to order

Customer Reviews for Viking Xtreme Drysuit:

See the top 20 most helpful scuba gear reviews

Average Customer Review: based on 1 reviews.

Rating: awsome product ! shipping sucked !!
Reviewer: Lenard Poole
reveiw of my viking dry suit its the best suit I ever dove in 24 years of pleasure and Light commercial work..... so dry and warm !! has off to viking for a great suit! len poole lenpoole marine services

Did this Review help?
No
Yes

212 out of 465 people found this review helpful.

Questions and Answers for Viking Xtreme Drysuit:


  • Rick:

    Purchased A VIKING X-treme around 10 years ago and was wondering what the body is made of. Still like new maybe used twice.

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Rick, the outer layer is made out of a polymer-coated stretch fabric.

Viking XTREME

The Viking XTREME is manufactured from a lightweight polyurethane material, with PU reinforced knee pads fitted for additional protection. This material is easy to clean should it become contaminated. Seams are high frequency welded for ultimate strength and security. The XTREME is an ideal drysuit for sports / wreck diving and technical diving.

Strong lightweight material
High frequency welded seams for security
Easy clean smooth exterior
Reinforced knees
Front or rear entry models available

Viking XTREME

FABRIC

Embossed single coated knitted fabric, with polyether polyurethane. Material weight approx. 474 g/m2.

COLOUR

Black / Black

SEAMS

Externally high frequency welding for security. Internal seams heat taped to hide the seam.

REINFORCEMENTS

PU embossed knee pads are welded above and below the knees for additional protection.
STANDARDS
EN 14225-2:2005

ZIPPER
Rear entry suits: PU Medium Duty zipper (85 cm length) welded into suit
Front entry suits: PU Medium Duty zipper (90 cm length) welded into suit
Zip flap fitted as standard to front entry suits
VALVES
Standard configuration includes the following valves mounted on rubber backing discs:
Central chest: Viking Push protected inlet valve
Hose: CEJN fitting, 80 cm long
Upper left arm: Viking low profile exhaust valve
BOOTS
Rubber coated 5 mm neoprene boots with a fin retainer are fitted as standard.
NECKSEAL
The Viking XTREME is fitted with a Surveyor latex neck seal as standard.
Alternative options:
Bellows latex neck seal, neoprene neck seal, quick connect collar system which allows for quick changing of broken seals.
HOOD OPTIONS
Viking XTREME suits may be fitted with a wide range of hood options as follows:
Surveyor latex hood + thermal inner hood, Nautic neoprene hood with smooth face seal, Smoothskin hood.
If the suit has been fitted with a Quick Connect collar system, then specific latex and neoprene hoods are available for fitting.
CUFFS
Latex conical cuffs are standard.
Cuff options:
PRO latex cuffs or bellows latex cuffs.
Glove ring options:
In order to make the suit completely waterproof, it is possible to fit a rubber cuff ring system with fixed external rubber ring, and loose stiff plastic ring which holds the latex seal in place. The alternative is a plastic bayonet glove ring system with a plastic ring mounted on the sleeve, and a replaceable cuff held in place with a plastic ring.
Both systems then make the fitment of Latex gloves possible.
INCLUDED WITH EACH DELIVERY
Each suit comes supplied as standard with the following items:
Suspenders, carry bag, user manual, repair kit and zip care materials.

View all Viking Dry Suits

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614

US and Canada 800.347.2822
International 001.949.221.9300