Average Customer Review: based on 2 reviews.Rating: Veo Review.
I want to replace my analog depth gauge with a new computer. The dimensions of the gauge are 2 3/8" by 1 3/16". Will the Veo 1.0 fit in my console? In the specs. I didnt see actual size. Thanks,
I have the Veo 1.0 and where can i get a wrist band for it. Cant find one on you website. Thanx Jeremy
The Sherwood Wrist mount will work. http://www.scuba.com/scuba-gear-67/008090/Sherwood-Wrist-Mount-Slimline-Dive-Gauge-Computer-Boot.html
We have a Data Plus 2 computer in our existing console and want to replace the computer with a new one the measurements of the Data Plus 2 is 2.25 inches can you recommend a simple nitrox compatible computer that will fit in that spot in the console? Jeff
Doesnt this come with a wrist band? Is it backlit? Is the display large and easy to read? Thanks.
It is complete with the wrist band. This particular computer does not offer back lighting.
I have this computer, is there a hose mount that i can buy for it?
Hello Gary, here is the link: http://www.scuba.com/scuba-gear-67/008004/Sherwood-Hose-Mount-Round-Computer-Boot.html. That will fit your current computer.
Im going on a live-aboard dive trip in April, I want an inexpensive but easy to use wrist dive computer to use as a backup to my Atomic Cobalt 2 (it has worked flawlessly but I would hate to have it fail on my trip and not have a backup). My backup regulator has an analog air gauge so I dont need anything but depth/time and dc computer functions. I have the Hollis DG03 but find it too complex as I keep putting it in the wrong mode. Is there an easier to operate alternative to the Hollis?
Hello Bill, here is the computer I would suggest for you: http://www.scuba.com/scuba-gear-17/009449/Suunto-ZOOP--Air---Nitrox-Wrist-Computer.html
Powered by Oceanic's Exclusive Dual Algorithm™ - Your choice between Pelagic DSAT (Spencer/Powell data basis) or Pelagic Z+ (Buhlmann ZHL-16C data basis)
Air or Single Nitrox Mix to 50% O2
Safety Stop Countdown Timer
Water and/or manual activation
Single button access to 'Last Dive' display (max depth & bottom time)
12 dive on-unit log book
Memory Reset for rental and training applications
Diver-Replaceable Battery with 8-second 'Hot Swap'
Now available with metric system.
Modes of Operation
Norm (Air / Nitrox)
Water or Push Button
Your choice between Pelagic DSAT (Spencer/Powell data basis) or Pelagic Z+ (Buhlmann ZHL-16C data basis)
Altitude Algorithm Basis
O2 Limit Basis
12 (5 to 480 minutes)
Automatic Altitude Adjustment
2,000 - 14,000 ft / 610-4200 m
OPTIONAL - :02 COUNTDOWN TIMER AT 1/2 MAX DEPTH FOR DIVES DEEPER THAN 80 ft/25m
10 - 60 ft (3-18 m)
Automatic Safety Stop Prompt
15 ft / 3m - 3 min
Ascent Rate Range
3,35 - 9 m/min / 6,4 - 18 m/min
Ascent Rate Maximum
30 fpm (60 fpm (>60 ft) / 18 m/min (>18m)
Diver Replaceable Batteries
300 DIVE HOURS
8-Second 'Hot Swap' retains calculations during battery change
Low Battery Indicator (Graphic)
Calendar / Clock
Operating Depth (NORM)
330 ft / 100 m
24 Hour Time to Fly Countdown
Calculated Desaturation Fly Countdown
Dive Mode Displays
MAIN, UP TO 2 ALTERNATES AND 1 SECONDARY
High O2 Alarm / Warning
300 SOTU / DOTU
High PO2 Alarm / Warning
1.6 DEFAULT OR USER SETTING
On-Unit Log Capacity
Pre-Dive Planning Sequence
PUSH BUTTON 9-57 m
Nitrogen Tissue Loading Bar Graph
Variable Ascent Rate Bar Graph
No Decompression Time Remaining Display
O2 Time Remaining Display
Set FO2 Value (%) Gas 1
Set Units Of Measurement
Set Hour Format (12/24 Hour)
Set Time of Day
Set Maximum PO2 Alarm
Set FO2 50% Default
Set Water Activation On/Off
30-Day Satisfaction Guarantee
*Battery Life: Battery life estimates are based on full-capacity batteries, and continuous usage as described.
7 days per week
2 dives per day
1 hour dive time
2 hour surface interval
18 hour interval from last dive to the first of the next day