Max Air 90SE 5000psi Breathing Air Compressor Max-Air 90SE1-5000 130855

Mfg Part #: Max-Air 90SE1-5000

Max Air 90SE 5000psi Breathing Air Compressor

*Standard Shipping Surcharge: $575.00
Not available for 3-Day, 2-Day or NextDay

Options: 
 $11,595.00 
3 Questions
3 Answers
  • Fully automatic
  • Continuous duty unit
  • Capable of filling up to 5000psi
  • Cascade storage cylinder compatible
  • Designed to refill SCUBA, SCBA(separate fill adapter required) and Paintball (separate fill adapter required) cylinders
  • Disposable tri-chem breathing air purification system
  • Dual fill outlets - one for direct fill, one for cascade bottles - cascade bottles sold separately
  • Two fill hose assemblies for SCBA or SCUBA with on/off valves and bleeder valves
  • Automatic and manual condensation purge/drain system with 1 gallon liquid container
  • Seamless stainless steel plumbing throughout
  • Automatic off/auto switch, automatically refill cascade as needed
  • Final automatic shut off pressure switch
  • Digital hour counter
  • Pressure safety relief valve at all stages
  • Time required to fill an 80 cubic foot cylinder from 500 to 3000 psi - 7.5 minutes
  • MOTOR: 7.5hp electric motor
  • VOLTAGE: Available in single phase 208/230 volt AC or three phase 208/230/460 volt AC 60Hz (see below to order)
  • MAX PRESSURE: 5000psi
  • APPROXIMATE OUTPUT: 9.0 F.A.D. 10.8 scfm charging rate
  • LUBRICATION: Splash lubrication with oil thrower pin
  • OIL TYPE: MaxLube 501 synthetic compressor oil
  • NOISE LEVEL: 81 decibels at 3 meters
  • COMPRESSOR RPM: 1550 RPM
  • OIL CAPACITY: 57oz.
  • DIMENSIONS: 44" x 28" x 35"
  • WEIGHT: 480 lbs
  • FULL MANUFACTURER'S WARRANTY

Failure to complete Diver Certification prior to use of this product, may result in injury or death

Customer Reviews for Max Air 90SE 5000psi Breathing Air Compressor:

See the top 20 most helpful scuba gear reviews

No reviews found for this product.

Questions and Answers for Max Air 90SE 5000psi Breathing Air Compressor:


  • Graham:

    hi we have a beach villa in mozambique and with three of the family advanced open water divers and one member a master diver. we are now looking to put our own compressor in place for when we travel out to mozambique as fills are very expensive there. with friends, the numbers of divers will vary from 2 to a maximum of 10 at any one time with the frequency of diving being between 5-7 times a year for 1-2 weeks at a time. so, two questions 1. which compressor would you recommend 2. do you deliver to mozambique? thanks graham

    Bill  (Certified Scuba Instructor at Scuba.com):

    The MaxAir 35 is a small portable compressor and can be ordered to run on gas or electric. It is not a continuous run compressor, but can fill 2 -3 80 cuft tanks before it needs to cool down for an hour or so. http://www.scuba.com/scuba-gear-155/030405/Max-Air-Max-Air-35-Standard-Scuba-Compressor.html If you need more than that the MaxAir 55 would be the next choice. http://www.scuba.com/scuba-gear-155/031100/Max-Air-55-Standard.html

  • Dean:

    Hi im looking into seting up a tank refill and well small scale shop in my area in wa as the local dive shop is very unrealiable so am doing research before i do so and costings are you able to point me in the direction of reps in perth wa on compressors for this perpose cheers Dean

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Dean, we know of no Reps in your area. If you like we can supply you with all the items you need to get a fill station up and running.

  • Dean:

    Hi if you were able to supply me with the setup what would I need to set to fill 1or 2 tanks at a time and about what would the cost be cheers Dean

    Bob  (Certified Scuba Instructor at Scuba.com):

    This unit comes complete for the filling of 2 scuba or scba bottles at a time.

Max-Air® 90 STD Electric

(Electric Driven)
10.8 scfm (18.4 m3/hr) / 5000 psi (345 bar)
(Single or Three Phase)

Stationary, Electric driven, high pressure, breathing air compressor for SCUBA, SCBA & Paintball. Designed for economy, and simplicity at an affordable price, loaded with standard features.

The Max-Air® 90 Standard is a dependable, high quality, breathing air compressor designed for continuous duty at an affordable price. Heavy duty design has commercial, marine, military, dive, police, paintball and fire department applications.

You will find the Max-Air® 90 Standard is ideal for dive centers, pleasure boats or fixed installations.

Compare the Max-Air® 90 Standard prices and features with any of the competition.

Available in a variety of drive units to fit any requirement.

Don’t forget to look at our ACCESSORIES!

Download PDF

Standard Features included in base price:
10.8 scfm (18.4 m3/hr)** / 5000 psi (345 bar)
7.5 HP U.S. made electric motor in single or three phase, 60 Hz (50 Hz and various voltage available )
Mounted on a durable, heavy duty, powder coated steel frame
Adjustable motor/belt tensioning base
Tri-chem breathing air purification system with activated carbon / 13X molecular sieve / hopcalite
Disposable purification cartridge is easy to replace
Breathing air processing capacity of 10,000 cft @ 72°F or prox 18 hours run time
New large capacity separators for Hot/Humid climates
Manual condensate drains
Pressure maintaining valve
Pressure relief valve on all stages
Intake filter
Final pressure gauge
58 oz (1.7 L) MaxLube 501 synthetic compressor oil (1st oil change)
(2) filling hose with On/Off valve and Bleed (SCUBA yoke, SCBA, DIN300 or Paintball)
Spare parts list and owner’s manual
One Year Warranty
Factory Options not included in base price:
CD-1000+ Automatic condensate drain with timers preset to drain periodically and on shut down
MS-3001 Magnetic starter, thermal overload, pressure switch, hour meter, fused transformer, installed UL® Listed
IS-1000 Interstage pressure gauges
MI-4000 Air line visual Moisture/CO indicator for cartridge life
LO-1005+ Low oil shut down switch
HT-1006+ High temperature shut down switch
PU-35000 Up-grade purification capacity to 35,000 cft @ 72°F or prox 65 hours run time
+ Can only be installed with MS-3001
Specifications Pumping Group***
Construction Continuous duty, air cooled, three stage, three cylinder high pressure compressor.
ALL STAINLESS STEEL INTERSTAGE AND FINAL STAGE COOLERS.
Max. Pressure 5000 psig – 340 bar
Output Prox. 9.0 F.A.D.; 10.8 scfm (18.4 m3/hr) charging rate **
Lubrication Splash lubrication with oil thrower pin
Oil type MaxLube 501 synthetic compressor oil
Drive Motor 7.5 HP AC electric motor in single or three phase, 60 Hz
Refill time Output 10.8 scfm (18.4 m3/hr)**; 7.5 minutes* *Time required to fill and 80 cu. Ft. cylinder from 500 to 3000 psig **Based on charging an 80 cu. Ft. cylinder from 500 to 3000 psig ***Specifications and prices subject to change without notice NOTE: All Standard “E” models must be hard wired to an On/OFF electrical fused panel by a licensed electrician

View all Max Air Compressors

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614