Failure to complete Diver Certification prior to use of this product, may result in injury or death
does the model come with filling yokes? time between air filter change? air filter cost? o2safe to 36% ? size of intake inlet? hour meter?
The Max Air 90 does come with filling yokes and comes equipped with an hour meter. The time between filter changes is dependent on humidity (usually 10 – 15 hours). The Max Air 90 uses a standard LF1002 filter and this filter has a moisture indicator to give a visual indication of when the filter needs to be changed. The LF1002 can be purchase from Scuba.com for 81.95. The air inlet size is 1”. With most compressors’ blending is done at the tank and not through the compressor.
I come from the Solomon Islands in the South Pacific. Do you have on this diving compressor two outlets for two persons with each horse of up to 100m?
A Hookah type compressor is probably a better choice if you want to use the compressor and dive with a hose and regulator. http://www.scuba.com/scuba-gear-152/Hookah-Systems.html
Max-Air® 90 GH/Mini-PBAC
(Reliable Honda® Gasoline Engine Driven)
10.8 scfm (18.4 m3/hr) / 5000 psi (345 bar)
Originally designed for the U.S. Marine Corps. This commercial adaptation is the preferred choice for a remote refill station where power is not available.
Used by the Military, Forestry Fire Fights, Dive Centers, Rescue Units and Paintball Fields. The Max-Air® 90GH/Mini-PBAC can be quickly loaded into a Humvee, pickup truck, boat or trailer for on-site refilling of SCBA’s, SCUBA cylinders and mobile cascades.
Don’t forget to look at our ACCESSORIES!
Standard Features included in base price:
10.8 scfm (18.4 m3/hr)** 5000 psi
Reliable air cooled, rope start, 9HP Honda® gasoline engine
Mounted on a durable, heavy duty, powder coated steel frame
Retractable carry handles (4) each/(4) persons
Tri-chem breathing air purification system with activated carbon / 13X molecular sieve / hopcalite
Disposable purification cartridge is easy to replace
Breathing air processing capacity of 10,000 cft @ 72°F or approximately 18 hours run time
Digital Hour/Tachometer (standard on gasoline models only)
New large capacity separators for Hot/Humid climates
Manual condensate drains
Pressure maintaining valve
Automatic shut down pressure switch #AS-1001
Pressure relief valve on all stages
Final pressure gauge 0-5800 psi (400 bar)
Engine oil drain extension tube
58 oz (1.7 L) MaxLube 501 synthetic compressor oil (1st oil change)
(2) filling hose with On/Off valve and Bleed (SCUBA yoke, SCBA, DIN300 or Paintball)
6 foot, rigid, two piece intake tube; easy to stow
Spare parts list and owner’s manual
One Year Warranty
Factory Options not included in base price:
CD-1000+ Automatic condensate drain with timers preset to drain periodically and on shut down
SG-90 External oil level sight glass
IS-1000 Interstage pressure gauges
MI-4000 Air line visual Moisture/CO indicator for cartridge life
LO-1005+ Low oil shut down switch
HT-1006+ High temperature shut down switch
ES-90-G Electric start engine with battery recharge
PU-35000 Up-grade purification capacity to 35,000 cft @ 72°F or prox 65 hours run time
BP-12V-G 12V Battery Package with recharge feature
LW-90PBAC-S Swivel, steel locking wheel set (4 each)
. + Can only be installed with ES-90-G and BP-12V-G unless 12VDC power is supplied by customer
Specifications Pumping Group***
Construction Continuous duty, air cooled, three stage, three cylinder high pressure compressor.
ALL STAINLESS STEEL INTERSTAGE AND FINAL STAGE COOLERS.
Max. Pressure 5000 psig (340 bar)
Output Prox. 9.0 F.A.D.; 10.8 scfm (18.4 m3/hr) charging rate **
Lubrication Splash lubrication with oil thrower pin
Oil type MaxLube 501 synthetic compressor oil
Drive Motor Air cooled, rope start, 9 HP, Honda® engine
Refill time Output 10.8 scfm (18.4 m3/hr)**; 7.5 minutes* *Time required to fill and 80 cu. Ft. cylinder from 500 to 3000 psig **Based on charging an 80 cu. Ft. cylinder from 500 to 3000 psig ***Specifications and prices subject to change without notice