Faber 120 Cubic Foot FX Series High Pressure Steel Tank FX120DVB 043039

Mfg Part #: FX120DVB

Customer Reviews for Faber 120 Cubic Foot FX Series High Pressure Steel Tank:

See the top 20 most helpful scuba gear reviews

Average Customer Review: based on 4 reviews.

Rating: Great Tank
Reviewer: John S.
Great tank at a very responsible price Im a big breather and bought this tank for a wreck diving and deep diving class. After the 40 min dive I still had 1300 psi.Another advantage of this tank was less lead needed for neutral buoyancy.I would highly recommend this tank. Thanks John S

Did this Review help?
No
Yes

5 out of 5 people found this review helpful.

Rating: 1st Steel Tank HP120
Reviewer: Michael Sapp
great tank just what i was looking for. same outside diameter as my 80cf alum. so switching back and forth between my 2 80cf tanks and my steel doesnt require changing tank strap configuration on my bc or spare air tank. trimmed weights the same as my 80cf tanks 6#s on the tank pouches and was able to 4-6#s out of my integrated weights while diving my trilam drysuit. the only dimension that changes is the length of the tank basically its a valve length taller than my 80s which i did not notice during the dive or while on the surface. length may be an issue heights under 511 but i didnt feel it hitting my butt or legs as others have complained. my lds only fills to 3000# so i am not getting the full 120cf but at 3000# i am getting around 108 cf and getting more bottom time ??. may buy another and sell my 2 80s. only complaint i have is o-ring wont stay in din used on 4 dives and have lost 3 o-rings. dont think youll be disappointed. adv ow, drysuit, wreck diver, and rescue diver certified.

Did this Review help?
No
Yes

Rating: 1st Steel Tank HP120
Reviewer: Michael Sapp
great tank just what i was looking for. same outside diameter as my 80cf alum. so switching back and forth between my 2 80cf tanks and my steel doesnt require changing tank strap configuration on my bc or spare air tank. trimmed weights the same as my 80cf tanks 6#s on the tank pouches and was able to 4-6#s out of my integrated weights while diving my trilam drysuit. the only dimension that changes is the length of the tank basically its a valve length taller than my 80s which i did not notice during the dive or while on the surface. length may be an issue heights under 511 but i didnt feel it hitting my butt or legs as others have complained. my lds only fills to 3000# so i am not getting the full 120cf but at 3000# i am getting around 108 cf and getting more bottom time ??. may buy another and sell my 2 80s. dont think youll be disappointed. adv ow, drysuit, wreck diver, and rescue diver certified.

Did this Review help?
No
Yes

Rating: 120 steel
Reviewer:
Nice tank, valve is ok

Did this Review help?
No
Yes

Questions and Answers for Faber 120 Cubic Foot FX Series High Pressure Steel Tank:


  • Glenn:

    Is the tank value in the i20 is 5/8 or 3/4 thread Yours Truly, Glenn Eckes

    Aaron  (Certified Scuba Instructor at Scuba.com):

    Hi Glenn, Inlet 3/4"

  • Luke:

    Does this tank come O2 clean?

    Darrick  (Certified Scuba Instructor at Scuba.com):

    Hello Luke, this is 40% Nitrox ready out of the box. If you require a higher percent of O2 then yes you would need to have this tank O2 cleaned.

  • William:

    My regulator instructions say that the max working pressure is 3300psi, so would dive shops be able and agreable about filling hp tanks to 3300psi? Is a special regulator required for hp tanks?

    Arthur  (Certified Scuba Instructor at Scuba.com):

    Hello, I''ve never herd of a regulator having a max working pressure. If anything you may have to have it re tuned.

The 120cf Faber Blue Steel FX Tank is an excellent high pressure steel tank.
F-x Series is a DOT E-13488 specification, no overfilling is allowed.
F-x Series is Transport Canada (TC) Approved.
All F-X Series cylinders are oxygen cleaned and suitable for Nitrox use.
Inlet Thread 3/4' - 14 NPSM.
Self draining boot and DIN/Yoke valve included.
Color: Faber White, corrosion resistant finish for durability.
Specifications: Height 29.33'(w/o valve), Diameter 7.24', Weight 39.2lbs (w/o valve)
This is a very high quality tank that can last a lifetime!

View all Faber Tanks

Choose Currency:

Scuba.com, 1752 Langley Avenue, Irvine CA 92614