Bare 6mm Ice Hard Sole Zipper Dive Boots 044910BLK-0204 103158


Mfg Part #: 044910

Bare 6mm Ice Hard Sole Zipper Dive Boots


Customer Reviews for Bare 6mm Ice Hard Sole Zipper Dive Boots:

See the top 20 most helpful scuba gear reviews

Average Customer Review: based on 2 reviews.

Rating: Great boots!
Reviewer: Mike C.  -  View all my reviews
I dive the cold Waters of Puget Sound and these keep my feet warm. They are very sturdy and dont fold under the weight of my dive hear while walking to the beach from the parking lot. Definitely recommend. The shipping was amazingly fast. Got these two days ahead of schedule.

Did this Review help?

1 out of 3 people found this review helpful.

Rating: lee zipperer
Reviewer: lee zipperer
sizes a great match.good product,speedy delivery,great customer service

Did this Review help?

71 out of 138 people found this review helpful.

Questions and Answers for Bare 6mm Ice Hard Sole Zipper Dive Boots:

There are no questions yet.


This coldwater boot comes with a with zipper and heavy-duty sole. Made 6mm neoprene.


6mm neoprene boot with a heavy-duty sole
Durable toe and heel cap
Fin tab to prevent strap movement
Heavy-duty zipper with gusset for easy entry
Double-glued and blind stitched


Sizes: USA 4, USA 5, USA 6, USA 7, USA 8, USA 9, USA 10, USA 11, USA 12, USA 13

Neoprene is a type of foam rubber that was
developed in the 1930s by scientists at DuPont. It
is used in virtually all wetsuits and is generally
laminated on either side with various materials to
produce varying degrees of stretch. BARE suits
generally use four different types of laminates
that produce four different degrees of stretch.
(1) Full-Stretch or 4-way stretch, used in our
ELASTEK suits, (2) Progressive-Stretch, used in
our Velocity series suits, (3) Powerstretch, used
in our Ignite series suits and (4) Standard
stretch used in our Sport s series suits.

What do I need to do before the dive?

When donning your boots be careful not to snag the
inner skin materials of the suit with fingernails,
rings, bracelets etc as this can affect the
sealing performance of your suit.

What do I need to do after the dive?

Prior to removing your boots be sure to unzip all
the zippers completely. Once all the zippers have
been unzipped, make your way out of the boots
taking care not to damage the boots by excessive
pulling or snagging with fingernails, rings,
bracelets etc.

How should I store my boots?

Salt water and chlorine can reduce the life of
your boots by drying out the neoprene. To keep
your BARE boots looking good and maintain their
health, after the dive you should let your boots
soak in warm freshwater for 30 min. After soaking,
rinse your boots and hang on a wetsuit hanger (a
thin hanger will stretch the suit). Be sure to
pull the zipper down all the way.

Note: Avoid placing your boots on hot surfaces and
storing in the trunk of your car for extended
periods of time.

What should I do about cuts or punctures on my

Sometimes, contact with rocks underwater is
unavoidable. Because of this, it is not uncommon
to get rips and tears in your boots wetsuit. If
you rip or tear your boots you can usually repair
it using neoprene glue by filling in the hole or
tear. Liquid Aquaseal is a common neoprene glue
that can be used for the repair and can be found
at one of our local retailers. Follow the
instructions on the packaging.

View all Bare Boots

Choose Currency:, 1752 Langley Avenue, Irvine CA 92614

Click to Call
US and Canada
949.221.9300 / Toll Free 1.800.347.2822
International 001.949.221.9300