Questions and Answers for Ocean Reef M-105 Digital Single Channel Transceiver Surface Unit:
There are no questions yet.
M105 Digital (code OR033126)
The M105 Digital is a surface to diver communication unit which allows surface personnel to talk with divers in the water and vice versa. The unit uses a 6V DC lead battery, allowing up to 48 hours of operation, or may be hardwired to a 12V DC source. The system is activated only when the transducer is connected, preventing unwanted loss of battery power. To start communication, the transducer must be lowered into the water; the standard cable length for the transducer is 10m (33 ft). Transmission is activated by pressing the microphone button, which will emit a short beep letting divers know transmission is about to begin. It will return to receive mode when the button is released.
The M105 Digital comes standard with the following items: > Headphone connection > Volume control > Speaker > Water resistant case w/ pressure compensation valve > Battery charger > Easy to read LED battery tester which shows the power status of the battery > Transducer cable bag > 10 meter (33 ft) antenna > Microphone
> Audio out cable (code 8590) > Headset (code 8589) > External power cable 12V (code 8594) > Tuner for >50 meters M105 Antenna (code OR008609) > Splitter for connection of 2 antennas at M105 or M105DC (code OR023001) > Mixer for audio output (code OR006512)
It is possible to purchase a “portable” battery tester
(code OR023003) for previous M105 BASIC units. A portable 9V battery tester is also available (code OR023002) for all GSM G.divers, GSM DC, GSM G-Power and M101A G.divers units.