|
|
|
|
Mfg Part Number : RB-4551
|
Innovative Fin Spring Strap (Pair) For Scubapro Twin Jet Dive Fins
Customer reviews see below
- Retrofit your ScubaPro Twin Jet fins with this easy to use kit
- Automatically adjust to the divers feet
- Compensates for depth and compression of boot material
- Unbreakable strap provides an amazing comfort and peace of mind
- Rugged rubber grip with finger loop is easy to access, even with thick gloves
- COLORS: Black, Grey, Blue, Yellow
- Does NOT work with ScubaPro Twin Jet Max fins
FULL MANUFACTURER'S WARRANTY
| | $34.95
|
Customer Reviews for Innovative Fin Spring Strap (Pair) For Scubapro Twin Jet Dive Fins: (Review this product)
See the top 20 most helpful scuba gear reviews
Average Customer Review:
based on 44 reviews.
Rating: Extended life for me and my Twin Jet fins.
Reviewer: Donald Rankin, Saturday, November 26, 2011
I have enjoyed my Scubapro Twin jet fins for years, but with continued use in salt water dives the adjustable straps became stubborn, resulting in extra effort needed for putting on and taking off of the fins on scuba dives. With the Fin Spring Straps I am back to fully enjoying all of the positive aspects of the split fin design, better acceleration with less effort, longer swim times without fatigue and now added wear comfort on extended dives and really easy on and off with no struggle, which is important on a shore dive with surf and air tank attempting to upset me. D. Rankin, 70 years young.
Did this Review help? Yes No
13 out of 24 people found this review helpful.
Rating: Innovative Fin Straps
Reviewer: Gary Doubleday, Friday, April 30, 2010
I purchase Two sets of the Fin strap , One for myself and the other set for my brother, what can i say about them . Wish i got them earlyer , they fit the scubapro Twin jet fins and they are so easy to put your fins on and to take them off . I have broken two set of Fin straps in the past , now i dont need to buy any more . you wont go wrong with these Innovative Fin Strap
Did this Review help? Yes No
115 out of 208 people found this review helpful.
Rating: springs for Scubapro Twin Jet Fins
Reviewer: Christopher Geller, Tuesday, June 15, 2010
Excellent item! They work great, however when you purchase them consider buying the springs one size smaller than your fin size. This comes in handy if you do a lot of warm water dives where you use a thinner booty. I am not saying anything negative about these springs, they are great!!
Did this Review help? Yes No
75 out of 185 people found this review helpful.
Rating: Makes putting on fins much easier
Reviewer: Douglas H., Friday, October 02, 2009
With heavy gloves and pounding surf, grabbing ScubaPro heel straps can be difficult. The Innovative springs go on much faster and easier. Hook a finger on the back loop and pull.
Installing them is a cinch. Unbuckle the straps and buckle in the springs.
Did this Review help? Yes No
191 out of 333 people found this review helpful.
Rating: springstraps for twinjets
Reviewer: Tomas Fernandez, Thursday, September 10, 2009
Fantastic... the straps are a perfect fit for the Scubapro Twinjet Fins...they absolutely enhance what i believe to be the best fin ever... a monkey can install them and they come in colors to match every taste taste, the construction is sturdy and professional and I would recommend that Scubapro make them the standard heelstrap instead of the originals.
The original straps became part of my "save a dive kit" instantly.
Tommy
Did this Review help? Yes No
198 out of 353 people found this review helpful.
Rating: Easy on and easy off!
Reviewer: Darcey B., Friday, March 13, 2009 - View all my reviews
I love these fin straps and reccomend them to everyone with Scubapro Twin Jet Fins! Makes getting fins on and off a breeze, especially while trying to remove fins in the water before climbing the dive boat ladder. No more fighting to loosen or tighten straps. I plan on buying an extra pair to put in my save-a-dive kit just in case because I never want to use the regular straps my fins came with again!
Did this Review help? Yes No
261 out of 491 people found this review helpful.
Rating: Great fin strap replacements
Reviewer: David Smith, Wednesday, November 26, 2008 - View all my reviews
My wife and I both purchased one of these (large and small). They are great replacements for the typical fin strap. Before my wife could not put on or take off her fins by herself, she always needed help because the OEM strap was so stiff and not easy to grasp. These Innovative straps are easy to grab, even with gloves on, and they hold the fins on without squeezing your foot in the fin. We have both been very happy with these replacements straps.
Did this Review help? Yes No
289 out of 645 people found this review helpful.
Rating: These straps are the bomb!
Reviewer: Julie Bruton, Wednesday, July 13, 2011
These straps work perfectly with my scubapro twin jet fins. Easy on and off make snorkeling a breeze even when entering in wavy waters!
Did this Review help? Yes No
45 out of 82 people found this review helpful.
Rating: A great replacement or backup strap
Reviewer: Kristian B., Thursday, September 25, 2008 - View all my reviews
I was very pleased with the seemless integration of these straps for my Twin Jets. They were easy to put on/take off in the water for shore diving/boat diving. I got two sizes so I could use when wearing softboots w/wetsuit or my hard boots/drysuit. The original scubapro straps are now in my save-a-dive kit (nobody should be without a backup strap or 2... trust me). Having multiple colors is a great plus.
Did this Review help? Yes No
320 out of 681 people found this review helpful.
Rating: Spring fin straps worth the money
Reviewer: George S., Monday, August 25, 2008 - View all my reviews
Really handy that the clips on these fit the twin jets without playing about with the original manufacture clips as some spring sets require. Fouls slightly on the heel of the fin, hopefully they will loosen a bit in time.
Did this Review help? Yes No
304 out of 652 people found this review helpful.
|