Compensates for depth and compression of boot material
Unbreakable strap provides an amazing comfort and peace of mind
Rugged rubber grip with finger loop is easy to access, even with thick gloves
Pin style strap for ScubaPro Twin Jet, Scubapro Jet, Aqua-Lung (U.S. Divers) Rocket, XS Scuba Power, Ocean Management Systems (OMS) Slipstream, International Divers Inc (IDI) Power, International Divers Inc (IDI) Frog Foot and most other metal type fin buckles
Rating: Spring Straps for Jet Fins
Reviewer: Richard Sorrem, - View all my reviews
They look and feel durable nice product. After install I tried them on with a boot and found them feeling just on. Could be tighter. I would recommending 1 size smaller. I have a size 11 foot using them on a Large size Scubapro Jet fins.
Did this Review help?
YesNo
53 out of 105 people found this review helpful.
Rating: nice product, but VERY big
Reviewer: christopher s.,
very nice for my size 12 feet. fit my old daco turbo fins and the installation was a snap. the extra large size is a bit loose on me and would no way fit my son with size 10 feet. i may return the second set that i bought and try to swap them out for a smaller size.
Did this Review help?
YesNo
130 out of 239 people found this review helpful.
Rating: They do the job...
Reviewer: Josh C., - View all my reviews
and allow you to wear drysuit boots. Rubber straps do not allow the stretch, in my opinion, for a larger boot. They seem rugged enough, but I have only used them a few times. I think this is my 10th review. Now, how about a $100 gift card.
Did this Review help?
YesNo
203 out of 402 people found this review helpful.
Rating: Easy to install
Reviewer: chan g., - View all my reviews
installation was a piece of cake, my foot was size 8, and i choose a M size strap, fit me just nice!
Did this Review help?
YesNo
45 out of 92 people found this review helpful.
Rating: good parts!
Reviewer: seizoh n.,
Place is more attractive than low price, and what parts can not be obtained in Japan
Did this Review help?
YesNo
34 out of 73 people found this review helpful.
Rating: Very comfortable
Reviewer: Paul Falten, - View all my reviews
The straps were easy to install and were very comfortable. In the water the straps make donning the fins in sandy, surf conditions very quick and easy. Sizing might be the only issue. Although I wear size 10 and was told to buy large straps, the straps would be too loose if I didnt wear a 3mm boot.
Did this Review help?
YesNo
304 out of 590 people found this review helpful.
Rating: Sam
Reviewer: SAM C.,
The new grip tight spring fin straps are the best. Easy to install on my old Scuba Pro fins. I always wanted spring loaded fins straps since I saw another diver using them, but hated giving up my old black 25 year old flippers and when I saw that I could convert my old fins I could not wait to buy some. I tried my new converted fins and now I figure I can get another 25 years of service from them. Thanks Scuba.com.
Sam Clore
Did this Review help?
YesNo
303 out of 598 people found this review helpful.
Rating: Fin Spring
Reviewer: Marc A T.,
I purchased these springs after much conversation with tech divers whom used the same Jet Fins as myself. Upon arrival I found the springs easy to install with a few basic common tools. Better yet, the use of these springs makes donning and removal of fins a breeze. On a large fin, I purchased a medium spring set and they work favorably.
Did this Review help?
YesNo
281 out of 626 people found this review helpful.
Rating: Not what I thought they would be....
Reviewer: Calvin Penfound, - View all my reviews
They were too big. The only sizes offered when I purchased were this size and larger, maybe you could have additional straps on offer with these fins for those who dry suit dive and need the bigger cup of the fin but not the huge straps.
Did this Review help?
YesNo
337 out of 710 people found this review helpful.
Rating: Straps
Reviewer: Scott H., - View all my reviews
Very nice design. Straps were too loose for my feet, but I like them so much, I am going to order a size down
Im considering buying these. I have the size large Scubapro Jet Fins and typically wear 5mm dive boots (California/coldwater). What size spring straps are typical for size large fins? It sounds like they may run large in some cases. My normal shoe size is 9 Mens. Thanks for your help!
Darrick (Certified Scuba Instructor at Scuba.com)
:
Hello Brandon, you are going to want to order the size medium. That size is designed for a size 8-10 boot. Unless you wear a hard sole boot then I would suggest the size large due to the fact the hard sole boot take up more space in the foot pocket. If you would like to place an order or have any other questions please feel free to give us a call at 1.800.347.2822.
Barbara:
OK, I have the size large Scubapro Jet Fins and wear them either with 5mm dive boots with decent but not overly thick soles (California / coldwater) OR, when I wear my drysuit, I wear a size 9/10 mens bootie over the drysuit feet (with a couple of pairs of socks inside). Thats my alternative to having to wear rock boots... So the fins are a little bit loose with the wetsuit booties and a little bit snug with the drysuit.
My normal shoe size is 8-1/2 womens, which tends to be around size 6 in mens. What size spring straps would you recommend?
Darrick (Certified Scuba Instructor at Scuba.com)
:
Hello Barbara, so you have a fin that fits a size (12-13) womens which is ScubaPro size large. If this is correct then I would suggest the size medium spring strap. That should make it a more comfortable fit for you wearing either size of your boot set-up. If you would like to place an order or have any other questions please feel free to give us a call at 1.800.347.2822.