Home » Archive

Articles in the New Scuba Diving Gear Category

New Scuba Diving Gear »

[14 Apr 2016 | No Comment | 56 views]
  • 2mm neoprene with outer SmoothSkin in the front body
  • 1mm neoprene lower sleeves
  • Flatlock seam contruction
  • Comfortable lightweight neoprene for less water absorption better durability and maximum stretch
  • MENS COLOR: Black
  • MENS SIZES: XSmall through 2XLarge
  • border=0 FULL MANUFACTURER’S WARRANTY

New Scuba Diving Gear »

[14 Apr 2016 | No Comment | 63 views]
  • This unique accessory allows you to mount the SureLock Weight System directly to the back plate
  • Includes necessary attachment hardware plus spares
  • May be used without the SureLock Weight System to spread the weight of the cylinders over the hips
  • 3 different grommet settings allow for proper positioning of the SureLock weight pockets
  • border=0 FULL MANUFACTURER?S WARRANTY

New Scuba Diving Gear »

[14 Apr 2016 | No Comment | 58 views]
  • Breathable moistur-wicking 4-way stretch
  • Comfortable flatlock seams lie flat and smooth against your skin
  • Tested and UPF rated to block 94% of UVA/UVB radiation from the sun
  • Elastic waistband
  • COLOR: Heather Black
  • SIZES: XSmall though 2XLarge
  • border=0 FULL MANUFACTURER?S WARRANTY

New Scuba Diving Gear »

[13 Apr 2016 | No Comment | 109 views]
  • Maximum operating depth: 394ft/120m
  • Two black plastic buttons provide easy access to modes and the set-up of basic parameters
  • Bookmark function
  • Altimeter
  • Lens protection cap
  • Dive logs can be stored and analyzed with a PC/Mac
  • Three-color nitrogen tissue loading bar graph makes it easy to monitor N2 status
  • Supports CCR systems (closed circuit rebreather)
  • BATTERY: CR2450 user replaceable battery rated for two years/300 dives
  • border=0FULL MANUFACTURER?S WARRANTY

New Scuba Diving Gear »

[12 Apr 2016 | No Comment | 85 views]
  • Each pocket holds up to 10 lbs
  • Bolts directly to the WTX harness
  • 2 inch stainless adjustable D-rings on the outside of each pocket
  • Able to mount to the back plate with the use of surelock attatchments
  • Mechanical weight release buckels 
  • Attatchment grommets to mount your choice of knife
  • Comes in a pair
  • border=0 FULL MANUFACTURER?S WARRANTY

New Scuba Diving Gear »

[12 Apr 2016 | No Comment | 63 views]
  • 18 inch overall lentgh
  • Integrated hose clips attach to the MP hose
  • Cable-activated rapid exhaust at the top simply pull down on lower unit to dump air
  • border=0 FULL MANUFACTURER?S WARRANTY

New Scuba Diving Gear »

[12 Apr 2016 | No Comment | 31 views]
  • These accessory pockets may be added to your rig to increase weight capacity or to trim your orientation in the water
  • Includes 2 weight pockets
  • Each pocket holds up to 5 lbs / 2.2 kg of lead weight
  • Pockets easily slide onto the tank band
  • The loops are large enough to pass over most tank band buckles
  • border=0 FULL MANUFACTURER?S WARRANTY

New Scuba Diving Gear »

[12 Apr 2016 | No Comment | 59 views]
  • Book screws can be used to attatch a wing to a back plate or to anchor an accessory to a backplate
  • Each kit comes with two compete sets of mating book screws with friction o-rings
  • Two different lengths are available 3/8 inch or 3/4 inch depending on your application
  • border=0 FULL MANUFACTURER?S WARRANTY

New Scuba Diving Gear »

[7 Apr 2016 | No Comment | 90 views]
  • Full face design – no water on the face
  • Natural breathing through mouth or nose
  • Dry top snorkel – keeps water out
  • Wide lens for superior viewing
  • Comfortable silicone sealing skirt
  • Streamlined design
  • No fogging
  • Sizes: Medium-Large Faces (110 lbs+) or Small-Medium Faces (50-110 lbs)
  • COLOR: Black
  • border=0 FULL MANUFACTURER?S WARRANTY

SEA VU DRY PROMO from Mares USA on Vimeo.

New Scuba Diving Gear »

[3 Apr 2016 | No Comment | 80 views]
  • Single Tank Tec Wing
  • 40 lbs of lift
  • K style inflator with brass buttons
  • saftery cable to prevent hyper-extention
  • inflator positioned off center so as not to interfere with regulator 1st stage
  • Two Low profile flat dump valves one in front and another lower left side
  • Tank stabilizer bars
  • Two large drain grommets
  • Exterior: 1000D Armorshield Cordura
  • Inner air cell: 22mil (.022) thick black urethane
  • Heavy duty YKK #10 plastic zip and slide
  • border=0 FULL MANUFACTURER?S WARRANTY